广告

筛选条件

广告
广告

热电偶温度变送器

热电偶温度变送器将热电偶的小毫伏输出转换为电流信号(通常为4-20 mADC),该信号不受长距离噪声和电压降的影响。

  • Acrolab 总共1条产品数据 点击查看 >

  • Chromalox 科模热思 总共1条产品数据 点击查看 >

    • Chromalox 科模热思 Rosemount™ Wireless Temperature Transmitter 热电偶温度变送器

      工作温度:-40 to 185 F (-40 to 85 C)
      热电偶形式:E; J; K; N; T; B; S; R; W
      其他输入:Accepts Generic Analog Voltage Inputs; Accepts Generic Resistance Inputs
      测量温度范围:-328 to 3632 F (-200 to 2000 C)
      安装方式:Thermohead or Thermowell Mounting (e.g. "Hockey puck" Style); DIN Rail Mounting
      产品类别:Thermocouple Temperature Transmitters
      特征:Intrinsically Safe; Digital or Analog Display
  • West Control Solutions 总共1条产品数据 点击查看 >

    • West Control Solutions KS 816 热电偶温度变送器

      热电偶形式:E; J; K; N; T; S; R; W
      其他输入:Accepts Generic Analog Voltage Inputs; Accepts Generic Analog Current Inputs; Accepts Generic Resistance Inputs
      测量温度范围:-328 to 4172 F (-200 to 2300 C)
      安装方式:DIN Rail Mounting
      用户接口:Computer Interface
      输出接口:Serial Interface
      工作温度:32 to 140 F (0.0 to 60 C)
      产品类别:Thermocouple Temperature Transmitters
  • Conax 康纳斯 总共19条产品数据 点击查看 >

    • Conax 康纳斯 6335D 热电偶温度变送器

      其他输入:Accepts Generic Resistance Inputs
      测量温度范围:-328 to 4172 F (-200 to 2300 C)
      安装方式:DIN Rail Mounting
      输出:Analog Current
      传感器连接方式:Screw Clamps or Lugs
      热电偶形式:E; J; K; N; T; B; S; R; W
      产品类别:Thermocouple Temperature Transmitters
  • Radwell International 拉德韦尔 总共198条产品数据 点击查看 >

  • Acromag 总共24条产品数据 点击查看 >

    • Acromag DT336 热电偶温度变送器

      安装方式:DIN Rail Mounting
      输出:Analog Current
      传感器连接方式:Terminal Block; Lead Wires; Screw Clamps or Lugs
      工作温度:-40 to 158 F (-40 to 70 C)
      热电偶形式:T
      其他输入:Accepts Generic Analog Voltage Inputs; Accepts Generic Analog Current Inputs
      产品类别:Thermocouple Temperature Transmitters
  • Tempco 总共6条产品数据 点击查看 >

    • Tempco ETM1 热电偶温度变送器

      工作温度:-40 to 185 F (-40 to 85 C)
      热电偶形式:E; J; K; N; T; B; S; R
      输出:Analog Current
      传感器连接方式:Screw Clamps or Lugs
      产品类别:Thermocouple Temperature Transmitters
      供电电压:6.5 to 36 VDC
  • Dataforth 总共86条产品数据 点击查看 >

    • Dataforth DSCP20 热电偶温度变送器

      传感器连接方式:Lead Wires
      热电偶形式:E; J; K; N; T; B; S; R
      测量温度范围:-328 to 3308 F (-200 to 1820 C)
      安装方式:DIN Rail Mounting
      输出:Analog Current
      输出接口:Serial Interface
      用户接口:Computer Interface
      工作温度:-13 to 176 F (-25 to 80 C)
      产品类别:Thermocouple Temperature Transmitters
  • Status Instruments 总共9条产品数据 点击查看 >

    • Status Instruments SEM310 热电偶温度变送器

      输出:Analog Current
      用户接口:Computer Interface
      安装方式:Thermohead or Thermowell Mounting (e.g.
      输出接口:Serial Interface
      传感器连接方式:Terminal Block; Lead Wires
      工作温度:-40 to 185 F (-40 to 85 C)
      热电偶形式:E; J; K; N; S; R
      测量温度范围:-328 to 3200 F (-200 to 1760 C)
      供电电压:10-35V DC
      产品类别:Thermocouple Temperature Transmitters
  • ABB Process Automation 过程自动化事业部 总共1条产品数据 点击查看 >

  • Pyromation 总共3条产品数据 点击查看 >

    • Pyromation Series 441 热电偶温度变送器

      其他输入:Accepts Generic Analog Voltage Inputs; Accepts Generic Resistance Inputs
      安装方式:Thermohead or Thermowell Mounting (e.g. "Hockey puck" Style) (optional feature); DIN Rail Mounting (optional feature)
      输出接口:Serial Interface
      热电偶形式:E; J; K; N; T; B; S; R
      输出:Analog Current
      用户接口:Computer Interface
      传感器连接方式:Screw Clamps or Lugs
      产品类别:Thermocouple Temperature Transmitters
      供电电压:8 to 30 VDC
  • OMEGA Engineering 欧米茄 总共22条产品数据 点击查看 >

    • OMEGA Engineering 欧米茄 DRA-TCI-2&DRA-RTI-2 热电偶温度变送器

      安装方式:DIN Rail Mounting
      工作温度:-20 to 70 °C (-4 to 158 °F)
      输出:4-20 mA 模拟电流
      测量温度范围:32 to 3092 °F (0.0 to 1700 °C)
      热电偶形式:E (optional feature); J (optional feature); K (optional feature); T (optional feature); B (optional feature); S (optional feature); R (optional feature)
      精度:±0.08% (K 型), ±0.1% 到 ±0.2% (其他类型)
      冷端补偿误差:±0.9 °C (典型值,0 到 60 °C 环境变化)
      抗共模干扰 (CMR):127 dB 典型值 (dc 到 60 Hz)
      输入信号范围:79 to 1490 °F (26 to 810 °C)
      隔离电压:1500 Vdc 或峰值交流
      材料(接触介质部分):聚碳酸酯
      输出最小值:79 °F (26 °C)
      产品类别:Thermocouple Temperature Transmitters
      产品尺寸(传感器头):3.23" H × 0.9" W × 3.90" D (82 × 22.5 × 99 mm)
      防护等级:IP40 (外壳), IP20 (端子)
      响应时间:160 毫秒 (0 到 98%)
      供电电压:10-40 Vdc
      重量(变送器+传感器):4.6 盎司 (130 克)
      零点和量程调节范围:-80 to 450 °F (-62 to 232 °C)
  • PR electronics 佩勒电子 总共6条产品数据 点击查看 >

    • PR electronics 佩勒电子 7501 热电偶温度变送器

      输出:Analog Current
      传感器连接方式:Screw Clamps or Lugs
      工作温度:-40 to 185 F (-40 to 85 C)
      热电偶形式:E; J; K; N; T; B; S; R; W
      其他输入:Accepts Generic Analog Voltage Inputs; Accepts Generic Resistance Inputs
      供电电压:10...35 VDC
      产品类别:Thermocouple Temperature Transmitters
  • Mescon Technologies 总共25条产品数据 点击查看 >

    • Mescon Technologies 20&1(D) 热电偶温度变送器

      型号20\/1是一个精密的,回路供电的2线制变送器,其输入和电流回路输出信号之间有电流隔离。它为RTD传感器信号的放大和线性化提供了必要的电路。输入电路可接受2线或3线RTD,用于直接或温差测量。可选LCD指示器可用于指示°C或°F中的实际温度。20\/1可轻松设置范围,无需特殊工具或电路板修改。变送器是Mescon先进通用输入变送器系列的一员,该系列变送器可随时重新配置,以接受其他常用输入,如热电偶、直流毫伏/毫安/伏和电位计。测试终端提供40-200毫伏的输出。将DVM应用于测试终端,可在不中断或断开电流回路的情况下监测和验证输出。
  • United Electric Controls (UE) 总共4条产品数据 点击查看 >

  • R.STAHL 阿斯塔赫尔 总共1条产品数据 点击查看 >

    • R.STAHL 阿斯塔赫尔 9182 热电偶温度变送器

      工作温度:-4 to 158 F (-20 to 70 C)
      热电偶形式:E; J; K; N; T; B; S; R
      测量温度范围:-328 to 3213 F (-200 to 1767 C)
      安装方式:DIN Rail Mounting
      输出:Analog Current
      用户接口:Analog Front Panel
      特征:Intrinsically Safe
      产品类别:Thermocouple Temperature Transmitters
  • Endress+Hauser ( E+H ) 恩德斯豪斯 总共10条产品数据 点击查看 >

    • Endress+Hauser ( E+H ) 恩德斯豪斯 iTEMP® HART® DIN rail TMT122 热电偶温度变送器

      热电偶形式:E; J; K; N; T; B; S; R
      其他输入:Accepts Generic Analog Voltage Inputs; Accepts Generic Resistance Inputs
      测量温度范围:-454 to 4523 F (-270 to 2495 C)
      安装方式:DIN Rail Mounting
      用户接口:Computer Interface
      传感器连接方式:Screw Clamps or Lugs
      工作温度:-40 to 185 F (-40 to 85 C)
      输出:Analog Current
      产品类别:Thermocouple Temperature Transmitters
      供电电压:12 To 35 V
  • MicroStrain by HBK 总共3条产品数据 点击查看 >

  • Durex Industries 总共2条产品数据 点击查看 >

    • Durex Industries 956047 热电偶温度变送器

      工作温度:-13 to 185 F (-25 to 85 C)
      热电偶形式:J; K
      测量温度范围:32 to 2192 F (0.0 to 1200 C)
      安装方式:Thermohead or Thermowell Mounting
      输出:Analog Current
      传感器连接方式:Screw Clamps or Lugs
      产品类别:Thermocouple Temperature Transmitters
      供电电压:10 - 30V DC
  • FineTek 凡宜科技 总共2条产品数据 点击查看 >

  • XINMIN 新敏电子 总共8条产品数据 点击查看 >

    • XINMIN 新敏电子 SBW温度变送器模块 热电偶温度变送器

      安装方式:二线制,可一体化安装或单独安装
      工作温度:-20~85℃
      输出:4~20mA 或 1~5VDC
      输入信号范围:热电偶 K型 / 热电阻 Pt100
      供电电压:24VDC ±10%
      测温范围:-200~450℃(热电阻) / 0~1200℃(热电偶)
      精度等级:0.2%FS / 0.5%FS
      负载电阻:0~500Ω
  • JUCSAN 九纯健科技 总共2条产品数据 点击查看 >

  • Omron 欧姆龙集团 总共3条产品数据 点击查看 >

    • Omron 欧姆龙集团 CS1W-PTS12 热电偶温度变送器

      输出接口:与CPU单元通信
      安装方式:背板安装,单槽尺寸
      工作温度:0到55°C
      精度:±0.1%(内部量程满量程)
      报警功能:HH、H、L、LL四点报警,变化率报警
      冷端补偿误差:±1°C
      转换周期:150 ms/4输入
      输入通道数:4
      输入阻抗:≥20 kΩ
      输入断线检测电流:0.1 μA(典型值)
      输入信号范围:热电偶
      隔离方式:变压器隔离
      最大信号输入:-80到80 mV
      工作湿度范围:10%到90%(无冷凝)
      电源消耗(5V):0.15 A
      产品类别:Fiber Optic Sensors
      分辨率:1/4096(内部量程满量程)
      响应时间:1秒(从0%到90%阶跃输入)
      RoHS认证:Y
      重量(变送器+传感器):≤450 g
      商标:Omron Automation and Safety
      子类别:Sensors
      工厂包装数量:1
      说明:光纤传感器 4pt hires isola ted rtd In
  • ifm 易福门 总共2条产品数据 点击查看 >

    • ifm 易福门 TA2135 热电偶温度变送器

      输出接口:IO-Link
      工作温度:-25...80 °C
      输出:4...20 mA
      测量温度范围:-50...150 °C
      热电偶形式:PT 1000
      精度:± 0.3 + (± 0.1 % MS)
      材料(接触介质部分):316L不锈钢 / 1.4404
      最大输出负载:250 (18...19 V); 300 (19...32 V)
      最高温度感应:+150°C
      探头直径:6mm
      探头长度:100mm
      探头材料:不锈钢
      防护等级:IP69K
      响应时间:3 s
      存储温度:-40...100 °C
      供电电压:18...32 V DC
      终端类型:M12 连接器
      重量(变送器+传感器):0.083 kg
      符合标准:CE, CULus, DIN EN 60751, DIN EN 61000-6-2, DIN IEC 68-2-27, DIN IEC 68-2-6
1 2
专家网(www.sensorexpert.com.cn) 热电偶温度变送器 专区,为你提供 热电偶温度变送器 品牌厂家,参数,型号,图片等优质产品相关供应信息,供你参考选择,找传感器就上传感器专家网。

查看更多

登录传感器专家网查看更多信息