广告

筛选条件

广告
广告

热电偶温度变送器

热电偶温度变送器将热电偶的小毫伏输出转换为电流信号(通常为4-20 mADC),该信号不受长距离噪声和电压降的影响。

  • JUCSAN 九纯健科技 总共2条产品数据 点击查看 >

  • Chromalox 科模热思 总共1条产品数据 点击查看 >

    • Chromalox 科模热思 Rosemount™ Wireless Temperature Transmitter 热电偶温度变送器

      工作温度:-40 to 185 F (-40 to 85 C)
      热电偶形式:E; J; K; N; T; B; S; R; W
      其他输入:Accepts Generic Analog Voltage Inputs; Accepts Generic Resistance Inputs
      测量温度范围:-328 to 3632 F (-200 to 2000 C)
      安装方式:Thermohead or Thermowell Mounting (e.g. "Hockey puck" Style); DIN Rail Mounting
      产品类别:Thermocouple Temperature Transmitters
      特征:Intrinsically Safe; Digital or Analog Display
  • West Control Solutions 总共1条产品数据 点击查看 >

    • West Control Solutions KS 816 热电偶温度变送器

      热电偶形式:E; J; K; N; T; S; R; W
      其他输入:Accepts Generic Analog Voltage Inputs; Accepts Generic Analog Current Inputs; Accepts Generic Resistance Inputs
      测量温度范围:-328 to 4172 F (-200 to 2300 C)
      安装方式:DIN Rail Mounting
      用户接口:Computer Interface
      输出接口:Serial Interface
      工作温度:32 to 140 F (0.0 to 60 C)
      产品类别:Thermocouple Temperature Transmitters
  • Conax 康纳斯 总共19条产品数据 点击查看 >

    • Conax 康纳斯 6335D 热电偶温度变送器

      其他输入:Accepts Generic Resistance Inputs
      测量温度范围:-328 to 4172 F (-200 to 2300 C)
      安装方式:DIN Rail Mounting
      输出:Analog Current
      传感器连接方式:Screw Clamps or Lugs
      热电偶形式:E; J; K; N; T; B; S; R; W
      产品类别:Thermocouple Temperature Transmitters
  • Radwell International 拉德韦尔 总共198条产品数据 点击查看 >

  • Acromag 总共24条产品数据 点击查看 >

    • Acromag DT336 热电偶温度变送器

      安装方式:DIN Rail Mounting
      输出:Analog Current
      传感器连接方式:Terminal Block; Lead Wires; Screw Clamps or Lugs
      工作温度:-40 to 158 F (-40 to 70 C)
      热电偶形式:T
      其他输入:Accepts Generic Analog Voltage Inputs; Accepts Generic Analog Current Inputs
      产品类别:Thermocouple Temperature Transmitters
  • Tempco 总共6条产品数据 点击查看 >

    • Tempco ETM1 热电偶温度变送器

      工作温度:-40 to 185 F (-40 to 85 C)
      热电偶形式:E; J; K; N; T; B; S; R
      输出:Analog Current
      传感器连接方式:Screw Clamps or Lugs
      产品类别:Thermocouple Temperature Transmitters
      供电电压:6.5 to 36 VDC
  • Dataforth 总共11条产品数据 点击查看 >

    • Dataforth DSCP20 热电偶温度变送器

      传感器连接方式:Lead Wires
      热电偶形式:E; J; K; N; T; B; S; R
      测量温度范围:-328 to 3308 F (-200 to 1820 C)
      安装方式:DIN Rail Mounting
      输出:Analog Current
      输出接口:Serial Interface
      用户接口:Computer Interface
      工作温度:-13 to 176 F (-25 to 80 C)
      产品类别:Thermocouple Temperature Transmitters
  • Acrolab 总共1条产品数据 点击查看 >

  • Status Instruments 总共9条产品数据 点击查看 >

    • Status Instruments SEM310 热电偶温度变送器

      输出:Analog Current
      用户接口:Computer Interface
      安装方式:Thermohead or Thermowell Mounting (e.g.
      输出接口:Serial Interface
      传感器连接方式:Terminal Block; Lead Wires
      工作温度:-40 to 185 F (-40 to 85 C)
      热电偶形式:E; J; K; N; S; R
      测量温度范围:-328 to 3200 F (-200 to 1760 C)
      供电电压:10-35V DC
      产品类别:Thermocouple Temperature Transmitters
  • ABB Process Automation 过程自动化事业部 总共1条产品数据 点击查看 >

  • Pyromation 总共3条产品数据 点击查看 >

    • Pyromation Series 441 热电偶温度变送器

      其他输入:Accepts Generic Analog Voltage Inputs; Accepts Generic Resistance Inputs
      安装方式:Thermohead or Thermowell Mounting (e.g. "Hockey puck" Style) (optional feature); DIN Rail Mounting (optional feature)
      输出接口:Serial Interface
      热电偶形式:E; J; K; N; T; B; S; R
      输出:Analog Current
      用户接口:Computer Interface
      传感器连接方式:Screw Clamps or Lugs
      产品类别:Thermocouple Temperature Transmitters
      供电电压:8 to 30 VDC
  • OMEGA Engineering 欧米茄 总共22条产品数据 点击查看 >

    • OMEGA Engineering 欧米茄 DRA-TCI-2&DRA-RTI-2 热电偶温度变送器

      安装方式:DIN Rail Mounting
      工作温度:-4 to 158 F (-20 to 70 C)
      输出:Analog Current
      测量温度范围:32 to 3092 °F (0.0 to 1700 °C)
      热电偶形式:E (optional feature); J (optional feature); K (optional feature); T (optional feature); B (optional feature); S (optional feature); R (optional feature)
      产品类别:Thermocouple Temperature Transmitters
      供电电压:10-40 Vdc
      共模抑制比 (CMR):127 dB 典型值 (dc 到 60 Hz)
      冷端误差:±0.9 °C (典型值,0 到 60 °C 环境变化)
      响应时间:160 毫秒 (0 到 98%)
      封装材料:聚碳酸酯
      尺寸:3.23" H × 0.9" W × 3.90" D (82 × 22.5 × 99 mm)
      工作温度范围:-20 to 70 °C (-4 to 158 °F)
      最小量程:79 °F (26 °C)
      精度(含线性度):±0.08% (K 型), ±0.1% 到 ±0.2% (其他类型)
      输入类型:J, K, T, E, R, S, B 型热电偶 / 2线或3线 Pt-100 RTD
      输入量程范围:79 to 1490 °F (26 to 810 °C)
      输入零点范围:-80 to 450 °F (-62 to 232 °C)
      输出信号:4-20 mA 模拟电流
      重量:4.6 盎司 (130 克)
      防护等级:IP40 (外壳), IP20 (端子)
      隔离电压:1500 Vdc 或峰值交流
  • PR electronics 佩勒电子 总共6条产品数据 点击查看 >

    • PR electronics 佩勒电子 7501 热电偶温度变送器

      输出:Analog Current
      传感器连接方式:Screw Clamps or Lugs
      工作温度:-40 to 185 F (-40 to 85 C)
      热电偶形式:E; J; K; N; T; B; S; R; W
      其他输入:Accepts Generic Analog Voltage Inputs; Accepts Generic Resistance Inputs
      供电电压:10...35 VDC
      产品类别:Thermocouple Temperature Transmitters
  • Mescon Technologies 总共25条产品数据 点击查看 >

    • Mescon Technologies 20&1(D) 热电偶温度变送器

      型号20\/1是一个精密的,回路供电的2线制变送器,其输入和电流回路输出信号之间有电流隔离。它为RTD传感器信号的放大和线性化提供了必要的电路。输入电路可接受2线或3线RTD,用于直接或温差测量。可选LCD指示器可用于指示°C或°F中的实际温度。20\/1可轻松设置范围,无需特殊工具或电路板修改。变送器是Mescon先进通用输入变送器系列的一员,该系列变送器可随时重新配置,以接受其他常用输入,如热电偶、直流毫伏/毫安/伏和电位计。测试终端提供40-200毫伏的输出。将DVM应用于测试终端,可在不中断或断开电流回路的情况下监测和验证输出。
  • United Electric Controls (UE) 总共4条产品数据 点击查看 >

  • R.STAHL 阿斯塔赫尔 总共1条产品数据 点击查看 >

    • R.STAHL 阿斯塔赫尔 9182 热电偶温度变送器

      工作温度:-4 to 158 F (-20 to 70 C)
      热电偶形式:E; J; K; N; T; B; S; R
      测量温度范围:-328 to 3213 F (-200 to 1767 C)
      安装方式:DIN Rail Mounting
      输出:Analog Current
      用户接口:Analog Front Panel
      特征:Intrinsically Safe
      产品类别:Thermocouple Temperature Transmitters
  • Endress+Hauser ( E+H ) 恩德斯豪斯 总共10条产品数据 点击查看 >

    • Endress+Hauser ( E+H ) 恩德斯豪斯 iTEMP® HART® DIN rail TMT122 热电偶温度变送器

      热电偶形式:E; J; K; N; T; B; S; R
      其他输入:Accepts Generic Analog Voltage Inputs; Accepts Generic Resistance Inputs
      测量温度范围:-454 to 4523 F (-270 to 2495 C)
      安装方式:DIN Rail Mounting
      用户接口:Computer Interface
      传感器连接方式:Screw Clamps or Lugs
      工作温度:-40 to 185 F (-40 to 85 C)
      输出:Analog Current
      产品类别:Thermocouple Temperature Transmitters
      供电电压:12 To 35 V
  • MicroStrain by HBK 总共3条产品数据 点击查看 >

  • Durex Industries 总共2条产品数据 点击查看 >

    • Durex Industries 956047 热电偶温度变送器

      工作温度:-13 to 185 F (-25 to 85 C)
      热电偶形式:J; K
      测量温度范围:32 to 2192 F (0.0 to 1200 C)
      安装方式:Thermohead or Thermowell Mounting
      输出:Analog Current
      传感器连接方式:Screw Clamps or Lugs
      产品类别:Thermocouple Temperature Transmitters
      供电电压:10 - 30V DC
  • ifm 易福门 总共2条产品数据 点击查看 >

    • ifm 易福门 TA2115 热电偶温度变送器

      输出:4...20 mA
      测量温度范围:-50...150°C
      热电偶形式:PT 1000
      精度:±0.3 + (± 0.1 % MS)
      最高温度感应:+150°C
      电源消耗(5V):<50 mA
      探头直径:6mm
      探头长度:50mm
      探头材料:不锈钢
      防护等级:IP69K
      响应时间:3 s
      存储温度:-40...100°C
      温度系数:0.1 % 跨度/10 K
      终端类型:M12 连接器
      重量(变送器+传感器):0.09 kg
      动态响应时间 T05 / T09:1 / 1/3 s
      安装长度:50 mm
      工作电压:18...32 V DC
      热电偶类型:PT 1000
      环境温度:-25...80°C
      符合标准:CE, CULus, DIN EN 60751, DIN EN 61000-6-2, DIN IEC 68-2-27, DIN IEC 68-2-6
      过程连接:G 1/4
  • Madshen 麦德胜 总共3条产品数据 点击查看 >

    • Madshen 麦德胜 MDS14X现场安装型HART温度变送器 热电偶温度变送器

      响应时间:1S
      抗射频干扰:>10V/m (80MHz…1000MHz)
      抗脉冲群:4级
      显示方式:LED型4位显示,LCD型1.4″多变量显示
      环境温度:-40…+85℃
      电源电压:11…30V DC
      组态方式:按键设置、PC可编程、HART手操器
      转换精度:≤0.1% 或 0.1℃
      输入信号:Pt100、Cu50、Pt1000等12种,K、E、S、B、R、J、T、N、C、D等10种
      输出信号:4…20mA 2-wire,HART协议
      量程范围:-270…+2495℃
      防护等级:IP67
      防雷等级:±4000V (≤5次)
      隔离电压:1500V DC
  • USTSensor 优斯特 总共1条产品数据 点击查看 >

  • Senex 森纳士 总共2条产品数据 点击查看 >

1 2
专家网(www.sensorexpert.com.cn) 热电偶温度变送器 专区,为你提供 热电偶温度变送器 品牌厂家,参数,型号,图片等优质产品相关供应信息,供你参考选择,找传感器就上传感器专家网。

查看更多

登录传感器专家网查看更多信息