"ACL Staticide 800 Digital Megohmmeter is an easy to operate, compact lightweight, portable meter designed to measure temperature, humidity and electrical resistance\/resistivity."
"Fluke 1662 part of the 1660 Series. The new Fluke 1660 series verify the safety of electrical installations in domestic, commercial and industrial applications. They ensure that fixed wiring is safe and correctly installed to meet the requirements of IEC 60364 and all relevant local standards. Fluke 1660 series are the only testers that help prevent damage to connected appliances. Fluke 1662 ensures Fluke reliability, simple operation and all the testing power you need for basic installation testing.RCD tripping current level ramp test. RCD auto test and ramp test. Pulsating dc sensitive RCD tests (G & S-type). Remote probe. On\/Off switchable auto-start for RCD and Looptest. Heavy duty, single input line cord. Computer interfaceLoop Impedance Test Type = Phase to Earth, Phase to NeutralAutomatic RCD Test = YesRCD Ramp Test = YesInsulation Test Voltage = 100 V, 250 V, 500 V, 1000 VMaximum Voltage Measurement = 500V ac\/dcTest Type = Continuity, Frequency, Insulation Resistance, Loop and Line Resistance, Measure Motor Windings, Phase Sequence Test, Prospective Earth Fault Current, Prospective Short Circuit Current, RCD Test, Resistance, Voltage, Wiring PolarityDownloadable Data = YesContinuity Test Current = 10mARemote Switch Mode = YesSafety Category = CAT III 500 V, CAT IV 300 V"
"Large, backlit LCD with analog bar graph and digital display - Three output voltages for insulation resistance testing: 250V, 500V, 1000V - Insulation resistance testing up to 4000 MOhm; switches automatically to voltage measurement when voltage is greater than 30V AC or 30V DC - AC\/DC voltage measurement up to 600V - Lo-Ohms function for testing connections - Last reading memory display - Four C-cell batteries for up to 5,000 tests per EN61557-2, with battery-life indicator and auto shut-off - Autodischarge of capacitive voltage - Heavy duty test leads, alligator clips and test probes - Rugged, splash-proof case with impact-absorbing holster"
"The H301B is a HiPot from Hipotronics. HiPot, or high potential, is a class of electronic test equipment used to verify electrical insulation. Engineers use HiPot-testing instruments on cables, wires, circuit boards, appliances, electric motors, and transformers. As a product ages, its insulation may break down and result in current flow leakage. HiPot testers keep engineers safe from current leakages by detecting gaps and defects in the electronic device. Dielectric Testers, Insulation Testers, and Megohmmeters are similar to HiPot testers. Popular manufacturers include Biddle, Megger, Fluke, Associated Research, Quadtech, Instek, and Slaughter.","Additional Features:","The H301B AC\/DC HiPot and Megohmmeter is an accurate bench type instrument designed to perform insulation tests on all types of electrical system components, assemblies and apparatus. They are designed for AC dielectric tests, DC dielectric tests and insulation resistance measurements with direct megohmmeter readings at 500 V DC output.","These testers are popular in the laboratory envionment due to the highly sensitive DC current meter and easily accessible front panel controls. They are also popular in production applications due to the rugged construction and ease of use."
