精度:±(0.8%+0.2%) |
电气连接:8-pin mini DIN |
工作温度:-10 ~ 50℃ |
重复性:±0.2% |
响应时间 t63:10 ms |
供电电流:35 mA |
供电电压:7 ~ 30 Vdc |
Analog Output Signal:0 to 5 Vdc |
Digital Communication Protocol:RS232 |
Humidity Range:0 ~ 100% non-condensing |
Maximum Pressure:145 psig |
Optional Analog Output Signal:4 to 20 mA |
Optional Digital Communication Protocol:RS485 |
Optional Portable Version:Supported |
Optional Totalizer:Supported |
Range:0.5 SCCM ~ 3000 SLM |
Span Shift:0.02% FS/℃/atm |
Turndown Ratio:200:1 |
Wetted Parts:302 and 303 SS; FKM; heat cured silicone RTV; glass reinforced PPS; heat cured epoxy; aluminum; gold; brass; 430 FR stainless; silicon; glass |
Zero Shift:0.02% FS/℃/atm |
精度:0.1%; 0.2%; 0.5% |
电气连接:1/2 NPT Conduit |
测量原理:Coriolis Force |
工作温度:-40 to 55℃ |
功率:15 W |
供电电压:18 to 36 Vdc |
Analog Output Signal:4 to 20 mA |
Body Material:304 Stainless Steel |
Certifications:CE; RoHS |
Connection:ANSI; DIN; JIS; Sanitary Flange |
Density Measurement Accuracy:± 0.002 g/cm³ |
Density Measuring Range:0.2 to 3.0 g/cm³ |
Digital Communication Protocol:RS485 (RTU Modbus) |
Digital Output Configuration:Pulse Output 0 to 10 kHz |
Maximum Pressure:16 bar |
Measuring Medium:Liquid; Gas; Slurry |
Measuring Tube Material:316 L Stainless Steel |
Optional Digital Communication Protocol:HART |
Optional Maximum Pressure:25 bar; 40 bar; 63 bar |
Optional Supply Voltage:85 to 265 Vac |
Process Temperature Range:-50 to 200℃ |
Protection Rating:NEMA 4X (IP65) |
Range:100 to 500,000 kg/h |
精度:±(0.8%~0.2%FS) |
电气连接:8-pin mini DIN |
工作温度:-10~50℃ |
重复性:±0.2% |
响应时间 t63:<10ms |
供电电流:35mA |
供电电压:7~30Vdc |
Analog Output Signal:0~5Vdc |
Calibration Gas:130+ Pure and Mixed Gases |
Digital Communication Protocol:RS232 |
Maximum Pressure:145psig |
Measurable Medium:Clean Gas |
Optional Analog Output Signal:4~20mA |
Optional Battery Life:18h |
Optional Digital Communication Protocol:RS485 |
Optional Totalizer:Supported |
Range:0.5 SCCM~3000 SLM |
Turndown Ratio:200:1 |
Wetted Parts:302/303 SS, FKM, PPS, Aluminum, Brass |
精度:0.1%; 0.2%; 0.5% |
密度测量范围:0.2 ~ 3.0g/cm³ |
电气连接:1/2 NPT conduit |
测量原理:Coriolis Force |
工作温度:-40 ~ 55℃ |
功率:15W |
重复性:0.05%; 0.1%; 0.25% |
供电电压:18 ~ 36Vdc |
Analog Output Accuracy:<0.005% Full Scale |
Analog Output Signal:4 ~ 20mA |
Body Material:304 Stainless Steel |
Certifications:CE; RoHS |
Connection:ANSI; DIN; JIS; Sanitary Flange |
Density Accuracy:±0.002g/cm³ |
Density Repeatability:0.001g/cm³ |
Digital Communication Protocol:RS485 (Modbus RTU); Optional HART |
Digital Output Accuracy:±0.075% Full Scale |
Digital Output Signal:0 ~ 10kHz |
Maximum Pressure:16bar; Optional 25bar; 40bar; 63bar |
Measuring Medium:Liquid; Gas; Slurry |
Measuring Tube Material:316L Stainless Steel |
Optional Supply Voltage:85 ~ 265Vac |
Process Temperature Range (Integrated):-50 ~ 125℃ |
Process Temperature Range (Remote):-50 ~ 200℃ |
Protection Rating:NEMA 4X (IP65) |
Size:DN15 ~ DN150 |
Temperature Accuracy:±1.0℃ |
Working Humidity:5 ~ 95% RH |
精度:±1.5% |
泄漏率:≤1 x 10^-9 std cc/sec |
测量原理:Heat Transfer |
工作温度:0 ~ 50℃ |
重复性:±0.5% |
响应时间 t63:800 ms |
供电电压:12 ~ 26Vdc |
Analog Output Signal:0 ~ 5Vdc; 4 ~ 20mA |
Certifications:CE; RoHS |
Current Consumption:200 mA |
Fluid Contact Materials:Aluminum/Brass; 316 Stainless Steel |
Max Gas Pressure:500 psig |
Measuring Medium:Clean Gas |
Optional Display:3½ digit LCD |
Range:10 SCCM ~ 1000 SLM |
精度:0.1%; 0.2%; 0.5% |
电气连接:1/2 NPT conduit |
工作温度:-40 ~ 55℃ |
重复性:0.05%; 0.1%; 0.25% |
供电电压:18 to 36 Vdc |
Analog Output Signal:4 to 20 mA |
Certifications:CE; RoHS |
Digital Communication Protocol:RS485 (Modbus RTU); HART |
Digital Output Configuration:Pulse Output (0 to 10 kHz) |
Flow Accuracy:0.1%; 0.2%; 0.5% |
Measuring Principle:Coriolis Force Principle |
Optional Supply Voltage:85 to 265 Vac |
Process Temperature Range:-50 ~ 125℃ (Integrated); -50 ~ 200℃ (Remote) |
Protection Rating:NEMA 4X (IP65) |
Temperature Accuracy:±1.0℃ |
Working Humidity:5 to 95% RH at 25℃ |
精度:±(0.8% + 0.2%FS) |
电气连接:8-pin circular mini DIN |
工作温度:-10 ~ 50℃ |
重复性:±0.2%FS |
供电电流:0.250 A; 0.75 A |
供电电压:12 ~ 30 Vdc; 24 ~ 30 Vdc |
Analog Output Signal:0 to 5 Vdc |
Control Response Time:100 ms |
Digital Communication Protocol:RS232 |
Excess Flow Rate:2.4% FS |
Humidity Range:0 ~ 100% RH |
Interface Type:1/4" FNPT |
Maximum Pressure:145 psig |
Minimum Differential Pressure Required:5 psid; 15 psid |
Optional Analog Input Signal:4 to 20 mA |
Optional Analog Output Signal:4 to 20 mA; 0 to 10 Vdc |
Optional Digital Communication Protocol:RS485 |
Optional Integrated Valve:Positive shut-off valve |
Optional Totalizer:6-digit counter |
Range:0.5 SCCM ~ 3000 SLM |
Span Shift:0.02%/ATM FS/℃ |
Turndown Ratio:200:1 |
Wetted Materials:303 and 302 SS, FKM, heat cured silicone RTV (rubber), glass-reinforced PPS, heat cured epoxy, aluminum, gold, silicone, glass; >250 SLM: 416 SS and nickel replace brass |
Zero Shift:0.02%/ATM FS/℃ |
精度:±1.5% |
工作温度:0 ~ 50℃ |
重复性:±0.5% |
响应时间 t63:800 ms |
供电电压:12 ~ 26Vdc |
Analog Output Signal:0 ~ 5Vdc; 4 ~ 20mA |
Certifications:CE; RoHS; EN55011 Class 1; EN55011 Class B; EN50082-1 |
Current Consumption:200 mA |
Fluid Contact Materials:Aluminum; Brass; 316 Stainless Steel; FKM |
Maximum Working Pressure:500 psig |
Maximum Working Pressure (≤100 SLM):1000 psig |
Range:10 SCCM ~ 1000 SLM |
精度:0.1~0.5% |
密度测量范围:0.2~3.0 g/cm³ |
电气连接:1/2 NPT conduit |
工作湿度:5~95% RH |
工作温度:-40~55℃ |
功率:15 W |
压力等级:16 bar |
供电电压:18~36 Vdc |
Analog Output Signal:4~20 mA |
Body Material:304 Stainless Steel |
Certifications:CE; RoHS |
Density Accuracy:±0.002 g/cm³ |
Digital Communication Protocol:RS485 (RTU Modbus); HART |
Digital Output Configuration:Pulse Output 0~10 kHz |
Flow Medium:Liquid; Gas; Slurry |
Measuring Tube Material:316 L Stainless Steel |
Optional Pressure Rating:25 bar; 40 bar; 63 bar |
Optional Supply Voltage:85~265 Vac |
Process Temperature:-50~125℃ (Integrated Type); -50~200℃ (Remote Type) |
Protection Rating:NEMA 4X (IP65) |
Range:15~150 mm |
Temperature Accuracy:±1.0℃ |
精度:±1% |
电气连接:9-pin sub-D connector |
泄漏率:1 x10^-6 cc/min of He |
工作温度:0 ~ 50℃ |
压力系数:0.01% per psi |
重复性:±0.15% |
响应时间 t63:5 s |
供电电压:Meters: 24 Vdc @ 150 mA, 115 Vac, 220 Vac with AC adaptor; Controller: 24 Vdc @ 300 mA, 115 Vac, 220 Vac with AC adaptor |
温度系数:0.05% per 1℃ |
Analog Output Signal:Linear 0 to 5 Vdc, 1000 Ω min load, 4 to 20 mA, 500 Ω loop resistance |
Control Signal:0 to 5 Vdc |
Control Valve:Electromagnetic normally closed |
Differential Pressure for Mass Flow Controllers:<5 LPM, 5 to 50 psi standard; >5 LPM, 20 to 40 psi standard |
Maximum Gas Pressure:Polyacetal: 250 psig; 316 SS: 500 psig |
Minimum Pressure Requirement:Meters: 1 inch of H2O; Controllers Up to 1 SLM: 1 psi; Controllers Greater than 20 SLM: 20 psi |
Mounting Threads:316 SS Body: 6/32" thread; Polyacetal: Self tap #4/6 screw |
Optional 316 SS Body:Supported |
Process Connection:1/4 FNPT standard; 1/4" compression fitting for all INLET stainless steel models |
Range:0 to 10 SCCM to 0 to 100 SLM |
Turndown Ratio:100:1 |
Weight:1.25 kg with power supply |
Wetted Materials:Standard: Polyacetal, FKM O-rings; Optional: 316 SS, FKM O-rings |
电气连接:1/2 NPT |
功率:15 W |
供电电压:18 ~ 36 Vdc |
Ambient Temperature:-40 ~ 55℃ |
Body Material:304 Stainless Steel |
Certifications:CE; RoHS |
Connection:ANSI; DIN; JIS; Sanitary |
Current Output:4 ~ 20 mA |
Density Accuracy:± 0.002 g/cm3 |
Density Measuring Range:0.2 ~ 3.0 g/cm3 |
Density Repeatability:0.001 g/cm3 |
Digital Communication Protocol:RS485 (RTU Modbus) |
Flow Accuracy:0.1 ~ 0.5% |
Flow Repeatability:0.05 ~ 0.25% |
Max Pressure:16 bar |
Measured Parameters:Mass Flow; Volume Flow; Density; Temperature |
Measuring Medium:Liquid; Gas; Slurry |
Measuring Principle:Coriolis |
Measuring Tube Material:316 L Stainless Steel |
Optional Digital Communication Protocol:HART |
Optional Max Pressure:25 bar; 40 bar; 63 bar |
Optional Supply Voltage:85 ~ 265 Vac |
Process Temperature Range (Integrated):-50 ~ 125℃ |
Process Temperature Range (Remote):-50 ~ 200℃ |
Protection Rating:NEMA 4X (IP65) |
Pulse Output:0 ~ 10 kHz |
Temperature Accuracy:±1.0℃ |
Working Humidity:5 ~ 95% RH |
精度:±(0.8%+0.2%) |
工作温度:-10~50℃ |
重复性:±0.2% |
响应时间 t63:≤10ms |
供电电流:35mA |
供电电压:7~30Vdc |
Analog Output Signal:0~5Vdc |
Cable Connection:8-pin mini DIN |
Calibration Gas:130+ Pure and Mixed Gases |
Connection:10-32 UNF; 1/8 FNPT; 1/4 FNPT; 1/2 FNPT; 3/4 FNPT; 1-1/4 FNPT |
Digital Communication Protocol:RS232 |
Humidity Range:0~100% non-condensing |
Maximum Pressure:145 psig |
Measurable Flow Rate:125% FS |
Measuring Medium:Clean Gas |
Optional Analog Output Signal:4~20mA |
Optional Battery:Supported |
Optional Portable Version:Supported |
Optional RS485:Supported |
Optional Totalizer:Supported |
Range:0.5 SCCM~3000 SLM |
Span Shift:0.02% FS/℃/atm |
Turndown Ratio:200:1 |
Wetted Parts:302 and 303 SS; FKM; heat cured silicone RTV; glass reinforced PPS; heat cured epoxy; aluminum; gold; brass; 430 FR stainless; silicon; glass |
Zero Shift:0.02% FS/℃/atm |
精度:0.1%; 0.2%; 0.5% |
电气连接:1/2 NPT conduit |
功率:15 W |
重复性:0.05%; 0.1%; 0.25% |
供电电压:18 ~ 36 Vdc |
Ambient Temperature:-40 ~ 55℃ |
Analog Output Signal:4 ~ 20 mA |
Body Material:304 Stainless Steel |
Certifications:CE; RoHS |
Connection:ANSI; DIN; JIS; Sanitary Flange |
Density Measurement Accuracy:±0.002 g/cm³ |
Density Measurement Repeatability:0.001 g/cm³ |
Digital Communication Protocol:RS485 (Modbus RTU); HART |
Digital Output Signal:Pulse (0 ~ 10 kHz) |
Max Working Pressure:16 bar; 25 bar; 40 bar; 63 bar |
Measurable Media:Liquid; Gas; Slurry |
Measured Parameters:Mass Flow; Volume Flow; Density; Temperature |
Measuring Principle:Coriolis Force |
Measuring Tube Material:316L Stainless Steel |
Optional Digital Communication Protocol:HART |
Optional Supply Voltage:85 ~ 265 Vac |
Process Temperature Range:-50 ~ 125℃; -50 ~ 200℃ |
Protection Rating:NEMA 4X (IP65) |
Range:0.2 ~ 3.0 g/cm³ |
Temperature Measurement Accuracy:±1.0℃ |
Wiring Configuration:2-wire |
Working Humidity:5% ~ 95% RH |
精度:0.1%; 0.2%; 0.5% |
电气连接:1/2 NPT conduit |
工作温度:-40 ~ 55℃ |
功率:15 W |
供电电压:18 ~ 36 Vdc |
Analog Output Signal:4 ~ 20 mA |
Body Material:304 Stainless Steel |
Certifications:CE; RoHS |
Density Measuring Range:0.2 ~ 3.0 g/cm³ |
Digital Communication Protocol:RS485 (RTU Modbus); HART |
Flow Accuracy:0.1%; 0.2%; 0.5% |
Flow Repeatability:0.05%; 0.1%; 0.25% |
Maximum Pressure:16 bar |
Measured Parameters:Mass Flow; Volume Flow; Density; Temperature |
Measuring Medium:Liquid; Gas; Slurry |
Measuring Tube Material:316 L Stainless Steel |
Nominal Diameter:15 ~ 150 mm |
Optional Digital Communication Protocol:HART |
Optional Maximum Pressure:25 bar; 40 bar; 63 bar |
Optional Supply Voltage:85 ~ 265 Vac |
Process Temperature Range (Integrated):-50 ~ 125℃ |
Process Temperature Range (Remote):-50 ~ 200℃ |
Protection Rating:NEMA 4X (IP65) |
Pulse Output:0 ~ 10 kHz |
Temperature Accuracy:±1.0℃ |
Working Humidity:5 ~ 95% RH |
精度:±(0.8%+0.2%FS) |
电气连接:8-pin circular mini DIN |
工作温度:-10 ~ 50℃ |
重复性:±0.2%FS |
供电电压:12 ~ 30Vdc |
Analog Output Signal:0 ~ 5Vdc |
Certifications:NIST Traceability |
Control Response Time:100ms |
Current Consumption:0.250A; 0.75A |
Digital Communication Protocol:RS232 |
Excess Flow Rate:2.4%FS |
Humidity Range:0 ~ 100%RH |
Input Control Signal:0 ~ 5Vdc |
Maximum Pressure:145psig |
Minimum Differential Pressure Required:5psid; 15psid |
Optional Analog Output Signal:4 ~ 20mA |
Optional Digital Communication Protocol:RS485 |
Optional Input Control Signal:4 ~ 20mA |
Range:0.5 SCCM ~ 3000 SLM |
Span Shift:0.02%/ATM FS/℃ |
Supply Voltage Range:12 ~ 30Vdc; 24 ~ 30Vdc |
Turndown Ratio:200:1 |
Wetted Materials:303 SS; 302 SS; FKM; PPS; Aluminum; Gold; Silicone; Glass; 416 SS; Nickel |
Zero Shift:0.02%/ATM FS/℃ |
精度:±1.5%; ±3% |
电气连接:9-pin D connector |
工作温度:0 ~ 50℃ |
重复性:±0.5% |
响应时间 t63:800 ms; 2 s |
供电电压:12 Vdc |
Analog Output Signal:0 ~ 5 Vdc; 4 ~ 20 mA |
Certifications:EN55011 Class 1; Class B; EN50082-1 |
Current Consumption:200 mA |
Materials:Aluminum/Brass; 316 Stainless Steel |
Max Gas Pressure:500 psig |
Optional Integral Display:Supported |
Optional Remote Display Cable:Supported |
Range:10 SCCM ~ 1000 SLM |
Weight:1.1 kg |
精度:±1.5% |
工作温度:0 ~ 50℃ |
重复性:±0.5% |
响应时间 t63:800ms |
供电电压:12 ~ 26Vdc |
Analog Output Signal:0 ~ 5Vdc; 4 ~ 20mA |
Certifications:EN55011 Class 1; EN55011 Class B; EN50082-1 |
Current Consumption:200mA |
Max Pressure:500psig |
Optional Display:3½ digit tiltable LCD |
Optional Display Cable:FMA18RC10; FMA18RC25 |
Range:10SCCM ~ 1000SLM |
精度:±1.5%FS |
控制范围:50:1 |
电气连接:1/8" compression fitting; 1/4" compression fitting; 3/8" compression fitting |
工作压力:≤150psi |
工作温度:10 ~ 50℃ |
功率:1.5W |
压力系数:±0.02%/psi |
重复性:±0.5%FS |
响应时间 t63:2s |
供电电压:12 ~ 15Vdc |
温度系数:±0.2%/℃ |
Analog Output Signal:0 ~ 5Vdc |
Applicable Gas:Air; Nitrogen; Carbon dioxide; Argon; Hydrogen; Helium; Methane; Oxygen |
Control Input Voltage:0 ~ 5Vdc |
Current Consumption:100mA |
Differential Pressure:15 ~ 40psi |
Filtration Requirement:20-micron filter |
Input Impedance:≥2500Ω |
Leak Integrity:≤1x10^-4SCCS He |
Range:0 ~ 10SLM |
Tundown Ratio:10:1 |
Valve Cycle Life:>1 million cycles |
Wetted Materials:Anodized aluminum; FKM O-rings; 304 SS; 316 SS; epoxy; acetal |
Wiring Configuration:2-wire |
精度:±1.5% FS |
控制范围:50:1 |
电气连接:0.6 m cable |
工作压力:≤150 psi |
工作温度:10 ~ 50℃ |
功率:1.5 W |
重复性:±0.5% FS |
响应时间 t63:2 s |
供电电压:12 ~ 15 Vdc |
Analog Output Signal:0 ~ 5 Vdc |
Connection:1/8" compression fitting |
Control Input Signal:0 ~ 5 Vdc |
Current Consumption:100 mA |
Differential Pressure:15 ~ 40 psi |
Leak Integrity:1×10^-4 SCCS He |
Optional Calibration:4-point NIST calibration certificate |
Range:0 ~ 10 SLM |
Size:81 L x 26 W x 97 mm H |
Turndown Ratio:10:1 |
Valve Cycle Life:>1000000 cycles |
Weight:386 g |
Wetted Materials:Anodized aluminum; FKM O-rings; 304 SS; 316 SS; epoxy; acetal |
精度:±1.5%FS |
电气连接:1/8" compression fittings; 1/4" compression fittings; 3/8" compression fittings |
工作压力:≤150psi |
工作温度:10 ~ 50℃ |
功率:1.5W |
压力系数:±0.02% per psi |
重复性:±0.5%FS |
响应时间 t63:2s |
供电电压:12 ~ 15Vdc |
温度系数:±0.2% per ℃ |
Current Consumption:100mA |
Gases:Air; nitrogen; carbon dioxide; argon; hydrogen; helium; methane; oxygen |
Leak Integrity:1x10^-4 SCCS He |
Optional Control Input:0 ~ 5Vdc |
Optional Control Range:50:1 |
Optional Differential Pressure:15 ~ 40psi |
Optional Display:3 1/2 digit LCD |
Optional Valve Cycle Life:>1 million cycles |
Optional Valve State:Normally closed |
Output Signal:0 ~ 5Vdc |
Range:0 ~ 10SLM |
Size:47mm L x 26mm W x 127mm H |
Turndown Ratio:10:1 |
Weight:249g |
Wetted Materials:Anodized aluminum; FKM O-rings; 304 SS; 316 SS; epoxy; acetal compression tube fittings |
精度:±(0.8% of rdg + 0.2% FS) |
电气连接:8-pin mini DIN |
工作温度:-10 ~ 50℃ |
重复性:±0.2% |
响应时间 t63:10 ms |
Analog Output Signal:0 ~ 5 Vdc |
Current Consumption:35 mA |
Digital Communication Protocol:RS232 |
Humidity Range:0 ~ 100% non-condensing |
Maximum Pressure:145 psig |
Optional Analog Output Signal:4 ~ 20 mA |
Optional Battery Life:18 h |
Optional Digital Communication Protocol:RS485 |
Optional Totalizer:Supported |
Range:0.5 SCCM ~ 3000 SLM |
Span Shift:0.02% FS/°C/atm |
Supply Voltage Range:7 ~ 30 Vdc |
Turndown Ratio:200:1 |
Wetted Parts:302 and 303 SS; FKM; heat cured silicone RTV; glass reinforced PPS; heat cured epoxy; aluminum; gold; brass; 430 FR stainless; 416 stainless steel; silicon; glass |
Zero Shift:0.02% FS/°C/atm |
精度:±1.5% |
工作温度:0 ~ 50℃ |
重复性:±0.5% |
响应时间 t63:800ms |
供电电压:12 ~ 26Vdc |
Analog Output Signal:0 ~ 5Vdc; 4 ~ 20mA |
Certifications:NIST Traceable Calibration; EN55011 Class 1; EN55011 Class B; EN50082-1 |
Current Consumption:200mA |
Fluid Contact Materials:Aluminum/Brass; 316 Stainless Steel |
Maximum Pressure:500psig |
Optional Display:3½ digit tiltable LCD |
Optional Remote Display Cable:Supported |
Range:10SCCM ~ 1000SLM |
精度:±1.5% |
工作温度:0 ~ 50℃ |
重复性:±0.5% |
响应时间 t63:800 ms |
供电电压:12 ~ 26Vdc |
Analog Output Signal:0 ~ 5Vdc; 4 ~ 20mA |
Certifications:EN55011 Class 1; EN55011 Class B; EN50082-1 |
Current Consumption:200 mA |
Maximum Gas Pressure:500 psig |
Optional Display:3½ digit LCD |
Range:10 SCCM ~ 1000 SLM |
精度:±1.5% |
工作温度:0 ~ 50℃ |
重复性:±0.5% |
供电电压:12 ~ 26Vdc |
Analog Output Signal:0 ~ 5Vdc; 4 ~ 20mA |
Certifications:EN55011 Class 1; EN55011 Class B; EN50082-1 |
Current Consumption:200 mA |
Maximum Gas Pressure:500 psig |
Optional Display:3½ digit tiltable LCD |
Optional Remote Display Cable:Supported |
Range:10 SCCM ~ 1000 SLM |
精度:±1.5% |
工作温度:0 ~ 50℃ |
压力系数:0.01%/psi |
重复性:±0.5% |
响应时间 t63:800 ms |
供电电压:12 ~ 26Vdc |
温度系数:0.15%/℃ |
Analog Output Signal:0 ~ 5Vdc; 4 ~ 20 mA |
Certifications:EN55011 Class 1; EN55011 Class B; EN50082-1 |
Current Consumption:200 mA |
Leak Integrity:1 x 10^-9 std cc/sec helium |
Optional Integral Display:Supported |
Range:10 SCCM ~ 1000 SLM |
Weight:1.1 kg |
查看更多
