电气连接:1/2 NPT conduit |
工作温度:-40 ~ 55℃ |
供电电压:18 ~ 36Vdc |
Analog Output Signal:4 ~ 20mA |
Body Material:304 Stainless Steel |
Certifications:CE; RoHS |
Connection Type:ANSI; DIN; JIS; Sanitary Flange |
Density Measurement Error:±0.002g/cm³ |
Density Measuring Range:0.2 ~ 3.0g/cm³ |
Digital Communication Protocol:RS485 (RTU Modbus); HART |
Digital Output Configuration:Pulse Output: 0 ~ 10kHz |
Flow Medium:Liquid; Gas; Slurry |
Mass Flow Accuracy:0.1%; 0.2%; 0.5% |
Max Working Pressure:16 bar |
Measuring Principle:Coriolis Force |
Measuring Tube Material:316 L Stainless Steel |
Optional Communication:HART |
Optional Max Working Pressure:25 bar; 40 bar; 63 bar |
Optional Supply Voltage:85 ~ 265Vac |
Process Temperature Range:-50 ~ 125℃; -50 ~ 200℃ |
Protection Rating:NEMA 4X (IP65) |
Size:15 ~ 150mm |
Temperature Accuracy:±1.0℃ |
Working Humidity:5 ~ 95% RH |
精度:±(0.8%+0.2%) |
电气连接:8-pin circular mini DIN |
工作温度:-10 ~ 50℃ |
重复性:±0.2% |
响应时间 t63:100 ms |
供电电压:12 ~ 30Vdc |
Analog Output Signal:0 ~ 5Vdc |
Connection:10 - 32 thread; 1/8 FNPT; 1/4 FNPT; 3/4 FNPT; 1 1/4 FNPT |
Current Consumption:0.250 A for 20 SLM and under; 0.75 A for 50 SLM and above (typical) |
Digital Communication Protocol:RS232 |
Excess Flow Rate:2.4% FS |
Humidity Range:0 ~ 100% RH |
Maximum Pressure:145 psig |
Minimum Differential Pressure Required:5 psid; 10 to 250 SLM: 15 psid; 500 SLM: 5 psid; 1500 SLM: 10 psid |
Optional Analog Input Signal:4 ~ 20 mA |
Optional Analog Output Signal:4 ~ 20 mA; 0 ~ 10Vdc |
Optional Digital Communication Protocol:RS485 |
Optional Positive Shut-off Valve:Supported |
Optional Totalizer:Supported |
Range:0.5 SCCM to 3000 SLM |
Span Shift:0.02%/ATM FS/℃ |
Turndown Ratio:200:1 |
Wetted Materials:303 and 302 SS, FKM, heat cured silicone RTV (rubber), glass-reinforced PPS, heat cured epoxy, aluminum, gold, silicone, glass; >250 SLM: 416 SS and nickel replace brass |
Zero Shift:0.02%/ATM FS/℃ |
精度:±1.5% FS |
电气连接:Compression Fittings |
泄漏率:≤1×10⁻⁹ std cc/sec |
工作温度:0 ~ 50℃ |
压力系数:≤0.01% FS/psi |
重复性:±0.5% FS |
响应时间 t63:800 ms |
供电电压:12 ~ 26 Vdc |
温度系数:≤0.15% FS/℃ |
Analog Output Signal:0 ~ 5 Vdc; 4 ~ 20 mA |
Certifications:CE; RoHS; EN55011 Class 1; EN55011 Class B; EN50082-1 |
Current Consumption:200 mA |
Fluid Contact Materials:Anodized Aluminum/Brass; 316 Stainless Steel |
Maximum Common Mode Pressure:500 psig |
Maximum Common Mode Pressure (≤100 SLM Range):1000 psig |
Medium Type:Clean Gas |
Optional Battery Pack:Supported |
Optional Display:Supported |
Optional Oxygen Clean:Supported |
Optional Remote Display Cable:Supported |
Range:10 SCCM ~ 1000 SLM |
精度:±1% FS |
电气连接:1/4" or 3/8" compression fittings |
泄漏率:1 x 10^-9 sccs He |
工作温度:0 ~ 50℃ |
重复性:±0.15% FS |
响应时间 t63:≤1 s (≤10 LPM); ≤2 s (>10 LPM) |
供电电压:±15 Vdc |
Analog Output Signal:0 ~ 5 Vdc; 0 ~ 10 Vdc |
Certifications:CE; RoHS |
Digital Communication Protocol:RS485 |
Fluid Contact Materials:316 stainless steel; FKM O-rings |
Max Operating Pressure:6.8 bar |
Optional Analog Output Signal:4 ~ 20 mA |
Optional Digital Communication Protocol:RS232 |
Optional Fluid Contact Materials:EPDM O-rings; Perfluoroelastomer O-rings; Buna O-rings |
Optional Supply Voltage:+12 Vdc; +24 Vdc |
Range:10 cc/min ~ 100 LPM |
Wiring Configuration:3-wire |
精度:±1% FS |
工作温度:5 ~ 50℃ |
重复性:±0.15% FS |
供电电压:11 ~ 26Vdc |
Analog Output Signal:0 ~ 5Vdc; 4 ~ 20 mA |
Attitude Sensitivity:Deviation of up to 1% from stated accuracy |
Certifications:CE; EMC compliance with 89/336/EEC; EN 55011:1991 Group 1 Class A; EN 55082-1:1992 |
Digital Communication Protocol:RS232 |
Flow Pressure Coefficient:0.01% of full scale/psi |
Flow Temperature Coefficient:0.15% of full scale/℃ |
Inlet and Outlet Connections:6.35 mm compression fittings; 9.53 mm compression fittings |
Leak Integrity:1 x 10^-9 SCCS He max |
Maximum Gas Pressure:3447 kPa gauge |
Maximum Pressure Drop:≤10 SLM: 1.28 kPa; >10 SLM: 27.58 kPa |
Media Type:Clean Gas |
Optional Digital Communication Protocol:RS485 |
Optional Inlet and Outlet Connections:3.18 mm compression fittings; 9.53 mm compression fittings |
Optional Wetted Materials:Buna; EPR; Perfluoroelastomer |
Relative Gas Humidity:≤70% |
Relay Output:SPDT (30 Vdc, 1A) |
Response Time t63:600 ms time constant |
Tundown Ratio:50:1 |
Wetted Materials:Anodized aluminum; Brass; 316 stainless steel; FKM O-rings |
精度:±(0.8%+0.2%FS) |
电气连接:8-pin circular mini DIN |
工作温度:-10 ~ 50℃ |
重复性:±0.2% FS |
供电电压:12 ~ 30Vdc |
Analog Output Signal:0 ~ 5Vdc |
Control Response Time:100 ms |
Current Consumption:0.25 A; 0.75 A |
Digital Communication Protocol:RS232 |
Excess Flow Rate:2.4% FS |
Humidity Range:0 ~ 100% RH |
Maximum Pressure:145 psig |
Minimum Differential Pressure Required:5 psid; 15 psid; 10 psid |
Optional Analog Input Signal:4 ~ 20 mA |
Optional Analog Output Signal:4 ~ 20 mA; 0 ~ 10Vdc |
Optional Digital Communication Protocol:RS485 |
Optional Digital Output:Totalizer |
Protection Rating:None |
Range:0.5 SCCM ~ 3000 SLM |
Recommended Maximum Operating Pressure:15 psig |
Span Shift:0.02%/ATM FS/℃ |
Turndown Ratio:200:1 |
Wetted Materials:303 and 302 SS, FKM, heat cured silicone RTV, glass-reinforced PPS, heat cured epoxy, aluminum, gold, silicone, glass; >250 SLM: 416 SS and nickel replace brass |
Zero Shift:0.02%/ATM FS/℃ |
精度:0.1 ~ 0.5% |
电气连接:1/2 NPT conduit |
工作温度:-40 ~ 55℃ |
功率:15W |
重复性:0.05 ~ 0.25% |
供电电压:18 ~ 36Vdc |
Analog Output Signal:4 ~ 20mA |
Applicable Medium:Liquid; Gas; Slurry |
Body Material:304 Stainless Steel |
Certifications:CE; RoHS |
Density Accuracy:±0.002g/cm³ |
Density Measuring Range:0.2 ~ 3.0g/cm³ |
Digital Communication Protocol:RS485 (Modbus); HART |
Digital Output Signal:0 ~ 10kHz |
Max Pressure:16bar |
Measuring Tube Material:316L Stainless Steel |
Nominal Diameter:DN15 ~ DN150 |
Optional Max Pressure:25bar; 40bar; 63bar |
Optional Process Temperature:-50 ~ 200℃ |
Optional Supply Voltage:85 ~ 265Vac |
Process Temperature:-50 ~ 125℃ |
Protection Rating:NEMA 4X (IP65) |
Range:15 ~ 150mm |
Temperature Accuracy:±1.0℃ |
Working Humidity:5 ~ 95% RH |
精度:±(0.8% of rdg + 0.2% FS) |
电气连接:8-pin mini DIN |
工作温度:-10 ~ 50℃ |
重复性:±0.2% |
响应时间 t63:<10 ms |
供电电流:35 mA |
供电电压:7 ~ 30 Vdc |
Analog Output Signal:0 ~ 5 Vdc |
Digital Communication Protocol:RS232 |
Gas Calibrations:130+ types |
Maximum Pressure:145 psig |
Measurable Medium:Clean Gas |
Optional Analog Output Signal:4 ~ 20 mA |
Optional Connection:1/8 FNPT; 1/4 FNPT; 1/2 FNPT; 3/4 FNPT; 1 1/4 FNPT |
Optional Digital Communication Protocol:RS485 |
Optional Feature:Portable Battery Powered; Totalizer; Volumetric Flow Output; Temperature/Pressure Secondary Output; SCFH Scaling |
Optional Output Configuration:Dual 4 ~ 20 mA; Dual 0 ~ 5 Vdc |
Range:0.5 SCCM ~ 3000 SLM |
Turndown Ratio:200:1 |
Wetted Parts:302/303 SS, FKM, silicone RTV, glass reinforced PPS, epoxy, aluminum, gold, brass, 430 FR stainless, silicon, glass |
精度:0.5% |
电气连接:1/2 NPT conduit |
功率:15W |
供电电压:18 ~ 36Vdc |
Ambient Temperature:-40 ~ 55℃ |
Analog Output Signal:4 ~ 20mA |
Body Material:304 Stainless Steel |
Certifications:CE; RoHS |
Connection Types:ANSI; DIN; JIS; Sanitary |
Density Accuracy:±0.002 g/cm³ |
Density Measuring Range:0.2 ~ 3.0 g/cm³ |
Digital Communication Protocol:RS485 (Modbus RTU); HART |
Digital Output Signal:0 ~ 10kHz |
Flow Range:200 ~ 8000 kg/h |
Max Pressure:16 bar |
Measuring Tube Material:316L Stainless Steel |
Optional Max Pressure:25 bar; 40 bar; 63 bar |
Optional Supply Voltage:85 ~ 265Vac |
Process Medium:Gas (Compressed Air) |
Process Temperature Range:-50 ~ 125℃; -50 ~ 200℃ |
Protection Rating:IP65 |
Temperature Accuracy:±1.0℃ |
Working Humidity:5 ~ 95% RH |
Zero Drift Stability:0.32 kg/h |
精度:0.1 ~ 0.5% |
电气连接:1/2 NPT conduit |
工作温度:-50 ~ 200℃ |
供电电压:18 ~ 36Vdc; 85 ~ 265Vac |
Analog Output Signal:4 ~ 20mA |
Body Material:304 Stainless Steel |
Certifications:CE; RoHS |
Digital Communication Protocol:RS485 Modbus RTU; HART |
Digital Output Configuration:Pulse 0 ~ 10kHz |
Max Pressure:16 bar |
Measuring Tube Material:316 L SS |
Optional Digital Communication Protocol:HART |
Optional Max Pressure:25 bar; 40 bar; 63 bar |
Optional Mounting:Remote Type |
Optional Supply Voltage:85 ~ 265Vac |
Protection Rating:IP65 |
Range:0.2 ~ 3.0g/cm³ |
精度:±1.5% |
泄漏率:≤1×10⁻⁹ std cc/sec |
工作温度:0 ~ 50℃ |
压力系数:≤0.01% per psi |
重复性:±0.5% |
响应时间 t63:800 ms; 2 s |
供电电压:12 ~ 26 Vdc |
温度系数:≤0.15% per ℃ |
Analog Output Signal:0 ~ 5 Vdc; 4 ~ 20 mA |
Certifications:CE; RoHS; EN55011 class 1; EN55011 class B; EN50082-1 |
Current Consumption:200 mA |
Materials in Fluid Contact:Aluminum/Brass; 316 Stainless Steel |
Maximum Gas Pressure:500 psig; 1000 psig |
Measured Medium:Clean Gas |
Optional Display:3½ digit LCD |
Optional Display Tilt:90° |
Optional Remote Display Cable:3 m; 7.6 m |
Range:10 SCCM ~ 1000 SLM |
精度:0.1%; 0.2%; 0.5% |
密度测量范围:0.2 ~ 3.0g/cm³ |
电气连接:1/2 NPT conduit |
工作温度:-40 ~ 55℃ |
重复性:0.05%; 0.1%; 0.25% |
供电电压:18 ~ 36Vdc |
Analog Output Signal:4 ~ 20mA |
Body Material:304 Stainless Steel |
Certifications:CE; RoHS |
Density Accuracy:±0.002g/cm³ |
Density Repeatability:0.001g/cm³ |
Digital Communication Protocol:RS485 (Modbus RTU) |
Digital Output Configuration:0 ~ 10kHz |
Max Pressure:16 bar |
Measuring Tube Material:316L Stainless Steel |
Optional Digital Communication Protocol:HART |
Optional Max Pressure:25 bar; 40 bar; 63 bar |
Optional Supply Voltage:85 ~ 265Vac |
Process Temperature Range:-50 ~ 125℃ (Integrated); -50 ~ 200℃ (Remote) |
Protection Rating:NEMA 4X (IP65) |
Range:DN15 ~ DN150 |
Temperature Accuracy:±1.0℃ |
Working Humidity:5 ~ 95% RH |
精度:0.1%; 0.05%; 0.2%; 0.1%; 0.5%; 0.25% |
电气连接:1/2 NPT conduit |
工作温度:-50 ~ 125℃; -50 ~ 200℃ |
功率:15 W |
供电电压:18 ~ 36 Vdc |
Ambient Temperature:-40 ~ 55℃ |
Analog Output Signal:4 ~ 20 mA |
Body Material:304 Stainless Steel |
Certifications:CE; RoHS |
Density Accuracy:± 0.002 g/cm³ |
Density Measuring Range:0.2 ~ 3.0 g/cm³ |
Density Repeatability:0.001 g/cm³ |
Digital Communication Protocol:RS485 (RTU Modbus); HART |
Digital Output Configuration:0 ~ 10 kHz |
Flow Accuracy:0.1%; 0.2%; 0.5% |
Maximum Pressure:16 bar |
Measuring Tube Material:316 L SS |
Optional Digital Communication Protocol:HART |
Optional Mounting Type:Remote |
Optional Pressure Rating:25 bar; 40 bar; 63 bar |
Optional Supply Voltage:85 ~ 265 Vac |
Process Temperature Range:-50 ~ 125℃; -50 ~ 200℃ |
Protection Rating:IP65 |
Range:0.2 ~ 3.0 g/cm³ |
Temperature Accuracy:±1.0℃ |
Wiring Configuration:2-wire; 4-wire |
Working Humidity:5 ~ 95% RH |
精度:±(0.8%~+0.2%FS) |
电气连接:8-pin circular mini DIN |
工作温度:-10 ~ 50℃ |
重复性:±0.2%FS |
响应时间 t63:100ms |
供电电流:0.25A |
供电电压:12 ~ 30Vdc |
Analog Output Signal:0 ~ 5Vdc |
Calibration Standard:NIST Traceable |
Digital Communication Protocol:RS232 |
Excess Flow Rate:2.4%FS |
Humidity Range:0 ~ 100%RH |
Maximum Pressure:145psig |
Optional Analog Output Signal:0 ~ 10Vdc; 4 ~ 20mA |
Optional Digital Communication Protocol:RS485 |
Optional Integrated Valve:Supported |
Optional Totalizer:Supported |
Span Shift:0.02%/ATM FS/℃ |
Turndown Ratio:200:1 |
Wetted Materials:303 and 302 SS; FKM; heat cured silicone RTV; glass-reinforced PPS; heat cured epoxy; aluminum; gold; silicone; glass |
Zero Shift:0.02%/ATM FS/℃ |
电气连接:1/2 NPT conduit |
工作温度:-40 ~ 55℃ |
功率:15 W |
供电电压:18 ~ 36 Vdc |
Analog Output Accuracy:0.005% |
Analog Output Signal:4 ~ 20 mA |
Body Material:304 Stainless Steel |
Certifications:CE; RoHS |
Connection:ANSI; DIN; JIS; Sanitary flanges |
Density Error:0.002 g/cm³ |
Density Measuring Range:0.2 ~ 3.0 g/cm³ |
Density Repeatability:0.001 g/cm³ |
Digital Communication Protocol:RS485 (Modbus RTU) |
Digital Output Configuration:Pulse Output |
Flow Accuracy (FMC-5100):0.1% |
Flow Accuracy (FMC-5200):0.2% |
Flow Accuracy (FMC-5500):0.5% |
Flow Repeatability (FMC-5100):0.05% |
Flow Repeatability (FMC-5200):0.1% |
Flow Repeatability (FMC-5500):0.25% |
Maximum Pressure:16 bar |
Measuring Medium:Liquid; Gas; Slurry |
Measuring Principle:Coriolis Force |
Measuring Tube Material:316L Stainless Steel |
Optional Digital Communication Protocol:HART |
Optional Maximum Pressure:25 bar; 40 bar; 63 bar |
Optional Supply Voltage:85 ~ 265 Vac |
Process Temperature Range (Integrated):-50 ~ 125℃ |
Process Temperature Range (Remote):-50 ~ 200℃ |
Protection Rating:NEMA 4X (IP65) |
Pulse Output Accuracy:0.075% |
Pulse Output Frequency Range:0 ~ 10 kHz |
Size Range:15 ~ 150 mm |
Temperature Accuracy:1.0℃ |
Working Humidity:5 ~ 95% RH |
精度:±(0.8% reading + 0.2% FS) |
电气连接:8-pin circular mini DIN |
工作温度:-10 ~ 50℃ |
重复性:±0.2% FS |
供电电压:12 ~ 30Vdc |
Analog Output Signal:0 ~ 5Vdc |
Connection:1/4 FNPT |
Control Response Time:100 ms |
Digital Communication Protocol:RS232 |
Excess Flow Rate:2.4% FS |
Humidity Range:0 ~ 100% RH, non-condensing |
Maximum Pressure:145 psig |
Measurement Medium:Clean Gas |
Optional Analog Input Signal:0 ~ 10Vdc |
Optional Analog Output Signal:4 ~ 20mA |
Range:50 SLM |
Response Time t63:50 ~ 100 ms |
Span Shift:0.02%/ATM FS/℃ |
Supply Voltage Range:24 ~ 30Vdc |
Turndown Ratio:200:1 |
Wetted Materials:303 and 302 SS, FKM, heat cured silicone RTV (rubber), glass-reinforced PPS, heat cured epoxy, aluminum, gold, silicone, glass; >250 SLM: 416 SS and nickel replace brass |
Zero Shift:0.02%/ATM FS/℃ |
精度:0.1 ~ 0.5% |
电气连接:1/2 NPT conduit |
功率:15W |
重复性:0.05 ~ 0.25% |
供电电压:18 ~ 36Vdc |
Ambient Temperature:-40 ~ 55℃ |
Analog Output Signal:4 ~ 20mA |
Body Material:304 Stainless Steel |
Certifications:CE; RoHS |
Current Output Accuracy:0.005% Full Scale |
Density Accuracy:±0.002g/cm³ |
Density Measuring Range:0.2 ~ 3.0g/cm³ |
Density Repeatability:0.001g/cm³ |
Digital Communication Protocol:RS485 (Modbus RTU) |
Digital Output Configuration:0 ~ 10kHz |
Maximum Working Pressure:16bar |
Measuring Tube Material:316L Stainless Steel |
Optional Digital Communication Protocol:HART |
Optional Maximum Working Pressure:25bar; 40bar; 63bar |
Optional Supply Voltage:85 ~ 265Vac |
Process Temperature Range:-50 ~ 125℃ (Integrated); -50 ~ 200℃ (Remote) |
Protection Rating:NEMA 4X (IP65) |
Pulse Output Accuracy:±0.075% Full Scale |
Range:15 ~ 150mm |
Temperature Accuracy:±1.0℃ |
Working Humidity:5 ~ 95% RH |
Packaging:Bulk |
Product Category:Flow Sensors - Industrial |
精度:±1% |
显示:2 lines x 16 characters LCD |
电气连接:6.35mm compression fitting; 9.53mm compression fitting |
工作温度:5 ~ 50℃ |
重复性:±0.15% |
响应时间 t63:600ms time constant |
供电电压:11 ~ 26Vdc |
Analog Output Signal:0 ~ 5Vdc; 4 ~ 20mA |
Attitude Sensitivity:≤1% |
Certifications:CE |
Digital Communication Protocol:RS232; RS485 |
Leak Integrity:1 x 10^-9 SCCS He max |
Maximum Gas Pressure:3447kPa gauge |
Maximum Pressure Drop:1.28kPa (≤10SLM); 27.58kPa (>10SLM) |
Measuring Medium:Clean Gas |
Range:0 ~ 5SCCM to 0 ~ 100SLM |
Relative Gas Humidity:≤70% |
Relay Output:2 sets SPDT (30Vdc, 1A) |
Turndown Ratio:50:1 |
Wetted Materials:Anodized aluminum; Brass; 316 stainless steel; FKM O-rings |
显示:128x64 graphic LCD |
电气连接:25 pin D connector |
重复性:±0.15% FS |
供电电压:±15Vdc; +12Vdc; +24Vdc |
Analog Output Signal:0-5Vdc; 0-10Vdc; 4-20mA |
Digital Communication Protocol:RS485 |
Flow Accuracy:±1% FS |
Flow Measurement Range:0 to 10 scc/min; 0 to 20 scc/min; 0 to 50 scc/min; 0 to 100 scc/min; 0 to 200 scc/min; 0 to 500 scc/min; 0 to 1 std liters/min; 0 to 2 std liters/min; 0 to 5 std liters/min; 0 to 10 std liters/min; 0 to 15 std liters/min; 20 std liters/min; 30 std liters/min; 40 std liters/min; 50 std liters/min; 60 std liters/min; 80 std liters/min; 100 std liters/min |
Flow Medium:Clean gases |
Flow Response Time:300ms; 600ms |
Gas and Ambient Temperature:0℃ to 50℃; -10℃ to 50℃ |
Leak Integrity:1 x 10^-9 sccs He |
Maximum Pressure Drop:8 psi |
Optional Analog Output Signal:0-10Vdc |
Optional Digital Communication Protocol:RS232 |
Optional Process Connection:1/8 inch compression fitting |
Pressure Measurement Range:0 to 100 psia |
Process Connection:1/4 inch compression fitting; 3/8 inch compression fitting |
Protection Rating:IEC 664 Installation Level II; Pollution Degree II |
Supply Voltage Range:±15Vdc; +12Vdc; +24Vdc |
Temperature Measurement Range:0℃ to 50℃ |
Wetted Materials:316 stainless steel; 416 stainless steel; FKM O-rings |
精度:±1% FS |
校准:Standard one 10 points NIST calibration. Optional up to 9 additional calibrations may be ordered for an additional cost, per gas. |
显示:128 x 64 graphic LCD with backlight |
工作温度:0 ~ 50℃ |
压力系数:0.01% of full scale/psi (0.07 bar) or better |
重复性:±0.15% FS |
响应时间 t63:≤1s (≤10 LPM); ≤2s (>10 LPM) |
供电电压:±15Vdc |
温度系数:0.15% of full scale/℃ or better |
Analog Output Signal:0 ~ 5Vdc; 0 ~ 10Vdc |
Certifications:CE; RoHS |
Connection:1/4" compression fittings; 3/8" compression fittings |
Digital Communication Protocol:RS485 |
Digital Output Configuration:Relay |
Gas & Ambient Temperature:5 to 50℃ |
Input Power:±15Vdc (±200 mA maximum); +12Vdc (300 mA maximum) optional; +24Vdc (250 mA maximum) optional |
Leak Integrity:1 x 10^-9 sccs of Helium maximum to the outside environment |
Materials in Fluid Contact:316 stainless steel, FKM O-rings. EPDM or Perfluoroelastomer O-rings optional |
Max Gas Pressure:6.8 bar |
Maximum Burst Pressure:13.6 bar |
Maximum Pressure Drop:8 psi (at 100 L/min flow) |
Optional Analog Output Signal:4 ~ 20mA |
Optional Digital Communication Protocol:RS232 |
Optional Supply Voltage:+12Vdc; +24Vdc |
Pressure Accuracy:±1% of FS |
Pressure Range:0 ~ 6.8 bar |
Protection Rating:EN 55011 class 1, class B |
Range:10 cc/min ~ 100 LPM |
Temperature Accuracy:±1℃ |
精度:±1.5% FS |
电气连接:Compression fitting; Dual 3/4 FNPT |
材质:316 Stainless Steel |
工作温度:0 ~ 50℃ |
重复性:±0.5% FS |
供电电压:12 ~ 26Vdc |
Analog Output Signal:0 ~ 5Vdc; 4 ~ 20mA |
Certifications:CE; RoHS; NIST Traceable |
Maximum Working Pressure:500 psig |
Measured Medium:Clean Gas |
Range:10 SCCM ~ 1000 SLM |
精度:±(0.8% of rdg + 0.2% FS) |
工作温度:-10 ~ 50℃ |
重复性:±0.2% |
响应时间 t63:<10 ms |
供电电流:35 mA |
供电电压:7 ~ 30 Vdc |
Analog Output Signal:0 to 5 Vdc |
Cable Connection:8-pin mini DIN |
Digital Communication Protocol:RS232 |
Humidity Range:0 ~ 100% non-condensing |
Maximum Pressure:145 psig |
Measurable Flow Rate:125% FS |
Optional Analog Output Signal:4 to 20 mA |
Optional Battery Life:18 h |
Optional Digital Communication Protocol:RS485 |
Optional Totalizer:Supported |
Range:0.5 SCCM ~ 3000 SLM |
Span Shift:0.02% FS/℃/atm |
Turndown Ratio:200:1 |
Wetted Parts:302 and 303 SS, FKM, heat cured silicone RTV, glass reinforced PPS, heat cured epoxy, aluminum, gold, brass, 430 FR stainless, silicon, glass |
Zero Shift:0.02% FS/℃/atm |
精度:±1% |
电气连接:Compression Fittings |
工作温度:5 ~ 50℃ |
重复性:±0.15% |
供电电压:11 ~ 26 Vdc |
Analog Output Signal:0 to 5 Vdc; 4 to 20 mA |
Certifications:CE; RoHS |
Digital Communication Protocol:RS232; RS485 |
Measuring Medium:Clean Gas |
Protection Rating:IP65 |
Range:0 to 100 SLM |
Turndown Ratio:50:1 |
精度:0.1%; 0.2%; 0.5% |
密度测量范围:0.2 ~ 3.0 g/cm³ |
电气连接:1/2 NPT conduit |
工作温度:-40 ~ 55℃ |
功率:15 W |
供电电压:18 ~ 36 Vdc |
Analog Output Accuracy:0.005% Full Scale |
Analog Output Signal:4 ~ 20 mA |
Body Material:304 Stainless Steel |
Certifications:CE; RoHS |
Density Accuracy:± 0.002 g/cm³ |
Density Repeatability:0.001 g/cm³ |
Digital Communication Protocol:RS485 (RTU Modbus) |
Flow Accuracy:0.1/0.05% (Liquid Only); 0.2/0.1% (Liquid Only); 0.5/0.25% (Liquid Only) |
Maximum Pressure:16 bar |
Measured Media:Liquid; Gas; Slurry |
Measuring Principle:Coriolis Force |
Measuring Tube Material:316 L Stainless Steel |
Nominal Diameter:15 ~ 150 mm |
Optional Digital Communication Protocol:HART |
Optional Maximum Pressure:25 bar; 40 bar; 63 bar |
Optional Supply Voltage:85 ~ 265 Vac |
Process Temperature Range:-50 ~ 125℃ (Integrated); -50 ~ 200℃ (Remote) |
Protection Rating:NEMA 4X (IP65) |
Pulse Output:0 ~ 10 kHz |
Pulse Output Accuracy:± 0.075% Full Scale |
Temperature Accuracy:±1.0℃ |
Wiring Configuration:ANSI; DIN; JIS; Sanitary flange |
Working Humidity:5 ~ 95% RH |
查看更多
