精度:±2% FS |
工作温度:-6.67 ~ 48.9℃ |
电气连接方式:18 in cable assembly |
量程:0 ~ 100 in w.c.; 0 ~ 100 mm w.c.; 0 ~ 100 Pa; 0 ~ 100 kPa |
工作电源电压:24 Vdc |
Certifications:CE |
Digital Output Configuration:SPDT; SPST NO |
Max Pressure:1.72 bar |
Optional Max Pressure:2.41 bar; 5.5 bar |
Process Connection:1/8 NPT |
Supply Voltage Range:21.6 ~ 26.4 Vdc |
Switching Current:1 A |
Switching Voltage:20 ~ 280 Vac |
精度:±3% |
工作温度:-34 ~ 82.2℃ |
电气连接方式:3 screw type |
量程:0.07 ~ 20 in w.c. |
工作电源电压:120 ~ 480 Vac |
Certifications:CE; CSA; FM; UL |
Max Continuous Pressure:11.2 kPa |
Max Surge Pressure:68.95 kPa |
Medium:Air and non-combustible, compatible gases |
Optional Explosion-Proof Housing:Supported |
Optional Manual Reset:Supported |
Optional Weatherproof Housing:Supported |
Process Connection:1/8" female NPT |
Protection Rating:IP66 |
Switch Contact Type:SPDT |
工作温度:-40 ~ 60℃ |
电气额定值:15A @ 125/250/480 Vac, 60Hz |
量程:0.15 ~ 0.50 in w.c. |
开关类型:SPDT |
Certifications:CE; CSA; FM; UL |
Continuous Pressure:0.11 bar |
Medium:Air and non-combustible, compatible gases |
Mounting Orientation:Diaphragm in vertical position |
Process Connection:1/8" female NPT |
Protection Rating:NEMA 3 (IP54); NEMA 7; NEMA 9 |
Surge Pressure:0.69 bar |
Wiring Configuration:3 screw type, common, normally open and normally closed |
工作温度:-34 ~ 82.2℃ |
电气连接方式:3 screw type, common, normally open and normally closed |
电气额定值:15 A @ 120-480 Vac, 60 Hz |
量程:0.07 ~ 20 in w.c. |
重复性:±3% |
开关类型:SPDT |
重量:581 g |
Certifications:CE; CSA; FM; UL |
Max Continuous Pressure:11.2 kPa |
Max Pulse Pressure:68.95 kPa |
Measured Medium:Air and non-combustible compatible gases |
Mounting Orientation:Diaphragm in vertical position |
Optional Explosion-Proof Housing:Class I, Groups D; Class II, Div. 2, Groups E, F, G; Class III and NEMA 7, 9 NEMA 3 |
Optional Manual Reset:Supported |
Optional Weatherproof Housing:NEMA 4, IP66 |
Process Connection:1/8˝ female NPT |
Set Point Adjustment:Screw type inside conduit enclosure |
精度:0.25% FS; 0.20% RSS; 1.0% FS; 0.5% RSS |
工作温度:-18 ~ 93℃ |
电流消耗:38 mA; 10 mA; 140 mA |
电气连接:Wire end; Hirschman DIN EN 175801-803-C; Packard; Deutsch; M12 |
过程连接:1/8˝ male NPT; 1/4˝ male NPT; 1/4˝ female NPT; 1/4˝ male BSPT; 1/4˝ female BSPT; 1/8˝ male BSPP ISO 1179; 1/4˝ male BSPP ISO 1179; 1/4˝ female SAE valve depressor; 1/2˝ male NPT |
外壳防护等级:NEMA 4X (IP66) |
响应时间:300 ms |
供电电压:10-30 VDC; 13-30 VDC; 5 VDC; 10-35 VDC; 13-35 VDC; 16-33 VAC |
重量:283 g |
Analog Output Signal:4-20 mA; 0-5 VDC; 1-5 VDC; 0-10 VDC; 0.5-4.5 VDC; 1-6 VDC; 2-10 VDC |
Certifications:CE; NSF/ANSI 61/372; ANSI/UL 218; ANSI/UL 508; NFPA 20 |
Compensated Temperature Range:-18 ~ 79℃ |
Mounting Orientation:Any position |
Optional LCD:Supported |
Optional NIST Certificate:Supported |
Optional NSF Certification:Supported |
Supply Voltage Range:4.5 ~ 5.5 VDC; 9 ~ 35 VDC; 13 ~ 35 VDC; 16 ~ 33 VAC |
Thermal Effect:±0.02% FS/℃ |
精度:±15% |
爆破压力:750psi; 51.7bar; 1250psi; 86.2bar |
电连接:#8-32 screw terminals |
工作温度:-40 ~ 120℃ |
量程:0.5 ~ 150psi; 0.03 ~ 10.35bar |
联锁开关类型:1 SPST NO, 1 SPST NC |
Certifications:California Proposition 65 |
Electrical Ratings:Resistive: 15A @ 6Vdc, 8A @ 12Vdc, 4A @ 24Vdc; Inductive: 1A @ 120Vac, 0.5A @ 240Vac |
Mounting Orientation:Any position |
Process Connection:1/4" NPT male |
Proof Pressure:500psi; 34.5bar |
Protection Rating:IP65 |
Set Point Adjustment:Screw |
Wetted Materials:304 SS; Polyamide film |
精度:±15% of range |
爆破压力:750 psi for 0.5-24 psi set point ranges; 1250 psi for 25-150 psi set point ranges |
电连接:#8-32 screw terminals |
工作压力:150 psi for 0.5-24 psi set point ranges; 250 psi for 25-150 psi set point ranges |
工作温度:-40 ~ 120℃ |
量程:0.5 ~ 198.3psi |
联锁开关类型:1 SPST NO, 1 SPST NC |
Inductive Load:1 A @ 120 VAC; 0.5 A @ 240 VAC |
Mounting Orientation:Any position |
Process Connection:1/4 NPT male |
Proof Pressure:500 psi |
Protection Rating:IP65 |
Resistive Load:15 A @ 6 VDC; 8 A @ 12 VDC; 4 A @ 24 VDC |
Service:Air, motor oils, transmission oils, jet fuels, and similar hydrocarbon media |
Set Point Adjustment:Screw |
Weight:0.06 kg |
Wetted Materials:Base: 304 SS; Diaphragm: Polyamide film |
工作温度:4 ~ 66℃ |
接触材料:Silver contacts, brass terminals |
膜片材料:Polyurethane |
电气连接:0.187˝ x 0.20˝ spade terminals for quick disconnect |
电气额定值:3-8 in w.c.: 3 A, 125/250 VAC; 9-80 in w.c.: 10 A, 125/250 VAC; 81-330 in w.c.: 15 A, 125/250 VAC |
材料:Polycarbonate |
压力范围:Up to max. range |
重复性:±20% |
开关类型:SPDT normally open or normally closed |
Certifications:cULus |
Minimum Life Expectancy:10 million cycles |
Process Connection:MVS 1-3: 0.25˝ smooth port; MVS 4-6: 1/8˝ NPT male thread |
Set Point Adjustability:Adjustable |
Set Point Range:3 ~ 330 in w.c. |
Weight:19 g |
Working Medium:Air or compatible fluids |
精度:±1.5% |
工作温度:See selection table |
刻度单位:psi; bar (x100 kPa) |
刻度盘直径:2.5in |
外壳材质:304 Stainless Steel |
防护等级:See selection table |
Mounting:Bottom; Back |
Optional Liquid Fill:Supported |
Optional Sliding Pointer:Supported |
Range:See selection table |
Wetted Parts Material:SGY: Brass; SGZ: 316 Stainless Steel |
爆破压力:750 psi (0.5-24 psi set point ranges); 1250 psi (25-150 psi set point ranges) |
工作压力:150 psi (0.5-24 psi set point ranges); 250 psi (25-150 psi set point ranges) |
工作温度:-40 ~ 120℃ |
产品类别:Pressure Switch |
重复性(氟橡胶/三元乙丙橡胶隔膜):±10% |
联锁开关类型:1 SPST NO; 1 SPST NC |
Electrical Connections:#8-32 screw terminals |
Electrical Ratings Inductive:1 A @ 120 VAC; 0.5 A @ 240 VAC |
Electrical Ratings Resistive:15 A @ 6 VDC; 8 A @ 12 VDC; 4 A @ 24 VDC |
Enclosure Rating:IP65 |
Model:A6-153221; A6-253221; A6-353221; A6-453221; A6-553221; A6-653221; A6-753221; A6-853221 |
Mounting Orientation:Any position |
Process Connection:1/4" NPT male |
Proof Pressure:500 psi |
Service Media:Air; motor oils; transmission oils; jet fuels; and similar hydrocarbon media |
Set Point Adjustment:Screw |
Set Point Range:0.5 ~ 150psi |
Set Point Range Unit:psi |
Set Point Tolerance:±15% |
Switch Independence:NO and NC switch independent from each other |
Wetted Materials Base:304 SS |
Wetted Materials Diaphragm:Polyamide film |
精度:±15% |
工作温度:-40 ~ 120℃ |
爆破压力:750 psi |
量程:0.5 ~ 1 psi |
重复性:±10% |
开关类型:1 SPST NO, 1 SPST NC |
Max Operating Pressure:150 psi |
Media Compatibility:Air, motor oils, transmission oils, jet fuels, and similar hydrocarbon media |
Model:A6-153221 |
Mounting Orientation:Any position |
Process Connection:1/4" NPT |
Proof Pressure:500 psi |
Protection Rating:IP65 |
Set Point Adjustment:Screw |
Wetted Materials:Base: 304 SS; Diaphragm: Polyimide film |
Wiring Configuration:#8-32 screw terminals |
精度:±3% |
膜片材质(黄铜内部):Silicone rubber |
外壳材质:Die cast aluminum |
过压保护(黄铜):Blowout plug (approx. 25 psig) |
材质(指针):Heat treated aluminum tubing |
防护等级:IP67 |
窗口材质:High impact transparent plastic |
Case Finish:Dark gray hammerloid |
Damping Medium:High viscosity silicone oil |
Model:2000-0 |
Mounting:Panel flush / Surface |
Optional Accuracy:±1% |
Range:0 ~ 0.50 in.w.c. |
精度:±1%; ±3%; ±4% |
外壳材质:Die Cast Aluminum |
过压保护(黄铜):25 psig |
防护等级:IP67 |
Display:Analog |
Face Material:High Impact Transparent Plastic |
Mounting:Panel Mount; Surface Mount |
Optional Adjustable Signal Flag:Supported |
Optional Calibration Certificate:Factory Calibration; 6-Point Calibration; NIST Traceable |
Optional High Accuracy:Supported |
Optional High Pressure:Supported |
Optional Integrated Mounting Plate:Supported |
Optional LED Set Point Indicator:Supported |
Optional Low Temperature:Supported |
Optional Medium Pressure:Supported |
Optional Mirrored Scale Overlay:Supported |
Optional Stainless Steel Bezel:Supported |
Optional Transparent Overlay:Green; Red; Yellow |
Range:0.05 ~ 300 in w.c.; 0 ~ 1000 Pa; 0.5 ~ 30 kPa |
精度:±3%; ±4%; ±1% (High Accuracy option) |
Diaphragm Material:Silicone rubber |
Face Material:Clear plastic |
Housing Material:Die cast aluminum (dark gray hammerloid finish) |
Measurement Type:Positive; Negative; Differential |
Mounting Type:Flush mounting; Surface mounting |
Optional Adjustable Signal Flag:Supported |
Optional Calibration Certificate:6-point calibration certificate; NIST traceable |
Optional Chrome Bezel:Supported |
Optional High Accuracy:Supported |
Optional High Pressure Option:Supported |
Optional Integrated Mounting Plate:Supported |
Optional LED Set Point Indicator:Supported |
Optional Low Temperature Option:Supported to -20°F (-28°C) |
Optional Medium Pressure Option:Supported |
Optional Mirrored Scale:Supported |
Optional Stainless Steel Bezel:Supported |
Optional Transparent Overlay:Green; Red; Yellow |
Overpressure Protection:~25 psig (1.7 bar) blowout plug |
Protection Rating:IP67 (Optional) |
Range:0-0.05 in w.c. ~ 0-1000 Pa |
精度:0.25% FS; 1.0% FS |
工作温度:-18 ~ 93℃ |
电流消耗:38 mA max; 10 mA max; 140 mA max |
电气连接:Wire end; Hirschman DIN EN 175801-803-C; Packard; Deutsch; M12 |
回路电阻:0-1000 Ω max |
过程连接:1/8 NPT; 1/4 NPT; 1/2 NPT; 1/4 BSPT; 1/8 BSPP; 1/4 SAE |
外壳防护等级:NEMA 4X (IP66) |
量程范围:0 ~ 15 psig ~ 0 ~ 3000 psig |
响应时间:300 ms |
供电电压:10 ~ 30 Vdc |
重量:283 g |
Analog Output Signal:4-20 mA; 0-5 Vdc; 1-5 Vdc; 0-10 Vdc; 0.5-4.5 Vdc |
Certifications:CE; NSF/ANSI 61/372; ANSI/UL 218; ANSI/UL 508; NFPA 20 |
Compensated Temperature Range:-18 ~ 79℃ |
Mounting Orientation:Any position |
Thermal Effect:±0.02% FS/℃ |
Wetted Materials:316L Stainless Steel |
连接类型:NPT |
Accessories:A-434 Portable kit; A-609 Air filter kit; A-497 Mounting bracket; A-489 4" 303 SS straight static pressure tip with flange; A-362 Stand-hang bracket, aluminum |
Mounting Method:Portable/Wall-mounted/Hanging bracket |
Product Model:2-5002-NPT |
Product Series:2-5000 |
Product Type:Minihelic® II differential pressure gage |
测量介质:303 Stainless Steel |
安装方式:Flange/Bracket |
Insertion Depth:4 in; 6 in; 8 in |
Tubing Inner Diameter:3/16 in |
精度:±1.5% |
工作温度:-28 ℃ |
阻尼:High viscosity silicone fluid |
显示类型:Pointer |
外壳材质:Die cast aluminum |
安装方式:Surface; Flush |
过压保护(黄铜):25 psig |
防护等级:IP66 |
Model:2003 |
Optional Accuracy:±1% |
Optional Bezel Material:Brushed 304 stainless steel; Chrome; Electro polished 304 stainless steel |
Optional Calibration Certificate:6-point; NIST traceable |
Optional High Accuracy:Supported |
Optional High Pressure:Supported |
Optional Integrated Mounting Plate:Supported |
Optional LED Set Point Indicator:Supported |
Optional Low Temperature:Supported |
Optional Medium Pressure:Supported |
Optional Mirrored Scale Overlay:Supported |
Optional Protection Rating:IP67 |
Optional Signal Flag:Supported |
Optional Transparent Overlay:Green; Red; Yellow |
Range:0 ~ 3.0 in w.c. |
Interface Type:NPT |
Measuring Type:差压 |
Model:2-5005-NPT |
Series:2-5000 Minihelic® II |
工作温度:-34 ~ 82.2℃ |
接点类型:Single-pole double-throw (SPDT) |
电气连接方式:3 screw type, common, normally open and normally closed |
最大工作压力:45 in w.c. (continuous); 10 psig (surge) |
量程:4.0 ~ 20.0 in w.c. |
重复性:±3% |
重量:581 g |
Certifications:CE; CSA; FM; UL |
Model:1910-20 |
Mounting Orientation:Diaphragm in vertical position |
Optional Explosion-Proof Housing:Supported |
Optional Manual Reset:Supported |
Optional Weatherproof Housing:Supported |
Process Connection:1/8˝ female NPT |
Protection Rating:IP66 |
Service:Air and non-combustible, compatible gases |
Set Point Adjustment:Screw type inside conduit enclosure |
精度:±1%; ±3% ~ ±4% |
工作温度:-28℃ |
阻尼:High viscosity silicone fluid |
膜片材质(黄铜内部):Silicone rubber |
外壳材质:Die cast aluminum |
过压保护(黄铜):1.7 bar |
防护等级:IP67 |
Dual Scale Air Velocity Units:0-0.25 in w.c./300-2000 FPM; 0-0.50 in w.c./500-2800 FPM; 0-1.0 in w.c./500-4000 FPM; 0-2.0 in w.c./1000-5600 FPM; 0-5.0 in w.c./2000-8800 FPM; 0-10 in w.c./2000-12500 FPM |
Optional Adjustable Signal Flag:Supported |
Optional Bezel:Brushed 304 stainless steel; Chrome; Electro polished 304 stainless steel |
Optional Calibration Certificate:6-point; NIST traceable |
Optional High Accuracy:Supported |
Optional High Pressure:80 psig |
Optional IP67:Supported |
Optional Integrated Mounting Plate:Supported |
Optional LED Set Point Indicator:Supported |
Optional Low Temperature:-28℃ |
Optional Medium Pressure:35 psig |
Optional Mirrored Scale Overlay:Supported |
Optional Transparent Overlay:Green; Red; Yellow |
Range:0 ~ 4.0 in w.c.; 0 ~ 1.0 kPa |
Zero Center Ranges:3-0-3 in w.c.; 1-0-1 in w.c.; 10-0-10 in w.c.; 15-0-15 in w.c.; 0.125-0-0.125 in w.c.; 0.25-0-0.25 in w.c.; 0.5-0-0.5 in w.c.; 1-0-1 in w.c.; 2-0-2 in w.c.; 5-0-5 in w.c.; 10-0-10 in w.c.; 15-0-15 in w.c.; 30-0-30 Pa; 50-0-50 Pa; 60-0-60 Pa; 100-0-100 Pa; 125-0-125 Pa; 150-0-150 Pa; 250-0-250 Pa; 500-0-500 Pa; 2-0-2 cm H2O; 5-0-5 cm H2O; 15-0-15 cm H2O; 0.5-0-0.5 kPa; 1-0-1 kPa; 1.25-0-1.25 kPa; 1.5-0-1.5 kPa |
精度:±1.0% FS |
工作温度:-1 ~ 49℃ |
显示:4-digit LCD |
电气连接:1/4˝ male NPT |
防护等级:IP67 |
分辨率(100-750PSI):0.002 |
供电电压:9V |
Auto Shut-off:20 min |
Housing Material:ABS plastic |
Optional NIST Calibration:Supported |
Overpressure Limit:2X pressure range |
Range:0 ~ 500psi |
Wetted Material:316L stainless steel; silicone sensor |
精度:0.25% FS; 0.20% RSS; 1.0% FS; 0.5% RSS |
工作温度:-18 ~ 93℃ |
电流消耗:38 mA max; 10 mA max; 140 mA max |
电气连接:Wire end; Hirschman DIN EN 175801-803-C; Packard; Deutsch; M12 |
回路电阻:0-1000 Ω max |
过程连接:1/8" NPT; 1/4" NPT; 1/2" NPT; BSPT; BSPP; SAE valve depressor |
外壳防护等级:NEMA 4X (IP66) |
响应时间:300 ms |
供电电压:10-35 VDC; 16-33 VAC |
重量:283 g |
接触材质:316L Stainless Steel |
Analog Output Signal:4-20 mA; 0-5 VDC; 1-5 VDC; 0-10 VDC; 0.5-4.5 VDC |
Certifications:CE; NSF/ANSI 61/372; ANSI/UL 218; ANSI/UL 508; NFPA 20 |
Compensated Temperature:-18 ~ 79℃ |
Mounting Orientation:Any position |
Optional Analog Output Signal:Selectable 0-5, 1-5, 0-10, 2-10 VDC |
Thermal Effect:±0.02% FS/℃ |
查看更多