已找到9件产品
  • Kistler Group 9119AA1 牵引力和张力测功机

    通用功率计具有最高的固有频率,91 x 80毫米。测功计的设置使精确测量非常小的力量,并保证最小的影响的热效应。
  • Kistler Group 9119AA2 牵引力和张力测功机

    具有高固有频率的通用测功机,107 x 80 mm。测功机的设置可以精确测量非常小的力,并保证热效应的影响最小。
  • Kistler Group 9129AA 牵引力和张力测功机

    通用功率计具有高固有频率,150 x 107毫米。测功计的设置可以精确测量高度动态的力量,并保证最小的影响的热效应。
  • Kistler Group 9139AA 牵引力和张力测功机

    具有高固有频率的通用测功机,240 x 192 mm。稳健的设计能够精确测量高动态力,并保证热效应的影响最小。
  • Kistler Group 9109AA 牵引力和张力测功机

    可达500n的紧凑多组件测功仪,具有极低的阈值和高灵敏度,新的MicroDyn能够测量难以置信的小负载,因此它为微加工过程提供了理想的解决方案。由于所有三个轴(x,y,z)都有超过15 kHz的共振,高度动态的力量可以捕捉到非常准确。除此之外,集中扭矩(Mz)测量也可以计算出来。测力计很容易安装在机器上,使用一个标准的磁性板或M4螺丝。类似地,工件可以容易地定位在测功机顶板通过阵列的M4孔和螺纹孔。
  • Kistler Group 9255C 牵引力和张力测功机

    非常坚固的测功机,具有所有测功机中最大的力范围和高刚度,360 x 300 mm。特别适合重型机械加工。易于安装,带有横向法兰。
  • Kistler Group 9257B 牵引力和张力测功机

    通用测功机,尺寸方便,170 x 140 mm。强大的测力计设置使高动态力的精确测量成为可能。易于安装,带有横向法兰。
  • Ametek Test & Calibration Instruments CH-DMG Series 牵引力和张力测功机

    The Chatillon® DMG Series Dynamometer lets you objectively measure manual muscle strength and functional task requirements for almost any application. Offers full portability and ease of use for a fraction of the cost of expensive computer controlled systems. Available in 200 lbf and 500 lbf capacities, these rugged mechanical instruments accurately measure (+0.5% FS) instantaneous push or pull forces generated by the test subject. A calibrated dial shows instantaneous force. An easy-to-use peak force switch freezes the pointer at the maximum force for simple identification and analysis. Gauges come complete with handle assembly and carrying case. Use with optional Functional Capacity Kit (FCEK) or Muscle Strength Comparator Kit (MSCK). All DMG Series gauges come standard with a Certificate of Calibration with data verification to NIST.
  • Ametek Test & Calibration Instruments CH-MSE100-M Series 牵引力和张力测功机

    The Chatillon® MSE-100-M Dynamometer is a simple-to-use, ergonomically designed mechanical instrument ideal for clinical or field muscle strength evaluations. The MSE-100-M features a large, easy-to-read 2-1\/4 analog dial (100 x 0.50 lbf) with tare ring. The gauge is uni-directional and displays force with an accuracy of better than 0.5% of full scale. The MSE-100-M comes standard with a handle assembly and a protective carrying case. Use with optional Functional Capacity Kit (FCEK) or Muscle Strength Comparator Kit (MSCK). The handle assembly is easily removed for storage. A convenient peak hold switch, located on the front of the instrument, can be set to automatically freeze the dial measurement at the peak force applied by the patient. All MSE-100-M gauges come standard with a Certificate of Calibration with data verification to NIST.