精度:±5% |
显示:4-digit alphanumeric display; 2 x green LED; 1 x yellow LED |
电流损耗:<50 mA |
设备尺寸:Ø 16 mm |
电气连接:M12 4-pin A-coded connector |
平均无故障时间（MTTF）:194 years |
材料（接触介质部分）:Stainless steel (1.4301 / 304); Stainless steel (1.4404 / 316L); FKM; NBR; PBT; PC; PA; PP; TPV |
模拟输出数量:1 |
过载保护:Yes |
探头长度 L [mm]:728 mm |
防护类别:III |
防尘防水:IP 67 |
重复性:±2 mm |
分辨率（加仑）:5 mm |
冲击耐久:15 g (11 ms) |
存储温度范围:-25 ~ 80 ℃ |
额定工作电压:18 ~ 30 Vdc |
震动耐久:5 g (10 ~ 2000 Hz) |
重量 [g]:548.6 g |
Active Range:585 mm |
Adjustment Step:10 mm |
Ambient Temperature:0 ~ 60 ℃ |
Analog Output Signal:4 ~ 20 mA; 0 ~ 10 V |
Digital Communication Protocol:IO-Link (COM2, 38.4 kBaud, Version 1.1) |
Digital Output Configuration:PNP/NPN |
EMC:DIN EN 61000-6-4; DIN EN 61000-6-2 |
Factory Setting:Hydrous coolants; water; media similar to water |
Full Signal Current:20 mA |
Full Signal Voltage:10 V |
Hysteresis OP:4 mm |
IO-Link Revision:1.1 |
Inactive Range:104 mm / 39 mm |
Materials Wetted Parts:PP |
Max. Load:500 Ω |
Max. Voltage Drop Switching Output DC:2.5 V |
Measuring Principle:Capacitive |
Medium Temperature:0 ~ 35 ℃ |
Min. Load Resistance:2000 Ω |
Min. Process Cycle Time:3.2 ms |
Number of Digital Outputs:1 |
Optional Medium Temperature:35 ~ 55 ℃ |
Optional Reset Point Range:50 ~ 580 mm |
Optional Set Point Range:60 ~ 590 mm |
Output Function:Normally open / closed (configurable) |
Pack Quantity:1 pcs. |
Parameter Setting Options:Hysteresis / window; Normally open / closed; Switching logic; Current / voltage output; SP / rP position; Adjustment OP; Medium selection; Offset setting; Switch-on / switch-off delay |
Permanent Current Rating Switching Output DC:200 mA |
Power-on Delay Time:<3 s |
Process Data Analog:2 |
Process Data Binary:1 |
Profiles:Smart Sensor - SSP 0: Generic Profiled Sensor; Function: Device identification; Function: Process data variable; Function: Device diagnosis |
Range:585 mm |
Reference Point OP:200; 240; 280; 310; 350; 390; 420; 460; 500; 530; 570; 610; OFF |
Required Master Port Class:A |
Reset Point rP:50 ~ 580 mm |
SDCI Standard:IEC 61131-9 |
SIO Mode:Yes |
Set Point SP:60 ~ 590 mm |
Short-circuit Protection:Yes |
Supported DeviceIDs:Default: 651 |
Transmission Type:COM2 (38.4 kBaud) |
Type of Short-circuit Protection:Thermal, pulsed |
Zero Signal Current:4.0 mA |
Zero Signal Voltage:0 V |
精度:±5% |
显示:4-digit alphanumeric |
连接器:1 x M12; coding: A; Contacts: 4, gold-plated |
电流损耗:<50mA |
设备尺寸:∅16mm |
电气连接:M12 4-pin |
功能:Device identification |
材料外壳:stainless steel (304/316L) |
平均无故障时间（MTTF）:265years |
材料（接触介质部分）:stainless steel (1.4301 / 304); stainless steel (1.4404 / 316L); FKM; NBR; PBT; PC; PA; PP; TPV |
工作温度:0 ~ 60℃ |
输出方式:Digital |
过载保护:yes |
探头长度 L [mm]:472mm |
防护类别:III |
防尘防水:IP67 |
重复性:±2% |
分辨率（加仑）:5mm |
电源防反接:yes |
冲击耐久:15g (11ms) |
存储温度范围:-25 ~ 80℃ |
额定工作电压:12 ~ 30Vdc |
震动耐久:5g (10...2000Hz) |
重量 [g]:372.2g |
湿材材质:PP |
Active Range:390mm |
Colors to DIN EN 60947-5-2:BK = black; BN = brown; BU = blue; WH = white |
Digital Communication Protocol:IO-Link |
Digital Output Configuration:PNP/NPN-NC/NO |
Display Unit:2 x LED, green (cm, inch) |
EMC:DIN EN 61000-6-2; DIN EN 61000-6-4 |
Electrical Design:PNP/NPN |
Factory Setting:automatic medium detection |
Hysteresis, OP:3mm |
IO-Link Revision:1.1 |
In Steps of:5mm |
Inactive Range I1 / I2:60 / 22mm |
Max. Voltage Drop Switching Output DC:2.5V |
Measured Medium:Water |
Measuring Error [% of the final value]:±5% |
Measuring Principle:capacitive |
Medium Temperature:0 ~ 35℃ |
Min. Process Cycle Time:3.2ms |
Number of Digital Outputs:2 |
OUT1:switching output or IO-Link |
OUT2:Switching output |
Output Function:normally open / closed; (configurable) |
Output Signal:switching signal; IO-Link |
Pack Quantity:1 pcs. |
Parameter Setting Options:hysteresis / window; normally open / closed; switching logic; SP/rP position; adjustment OP; medium selection; offset setting; switch-on/switch-off delay |
Permanent Current Rating of Switching Output DC:200mA |
Power-on Delay Time:<3s |
Process Data Analog:2 |
Process Data Binary:2 |
Process data variable:Device diagnosis |
Range:35 ~ 390mm |
Reference Point OP:139 - 163 - 188 - 212 - 236 - 261 - 285 - 310 - 334 - 358 - 383 - 407 - OFF |
Required Master Port Class:A |
Reset Point rP:30 ~ 385mm |
SDCI Standard:IEC 61131-9 |
SIO mode:yes |
Set Point SP:35 ~ 390mm |
Short-circuit Protection:yes |
Smart Sensor - SSP 0:Generic Profiled Sensor |
Switching Status:2 x LED, yellow |
Transmission Type:COM2 (38,4 kBaud) |
Type of Operation:DeviceID |
Type of Short-circuit Protection:thermal, pulsed |
default:656 |
精度:±5% |
显示:2 x LED (green); 1 x LED (yellow); Alphanumeric display (4-digit) |
电流损耗:<50 mA |
设备尺寸:Ø16 mm |
电气连接:M12 4-pin plug |
迟滞:5 mm |
平均无故障时间（MTTF）:194 years |
材料（接触介质部分）:Stainless steel (304/316L); PP; FKM; NBR; PBT; PC; PA; TPV |
工作温度:0 ~ 60 ℃ |
探头长度 L [mm]:472 mm |
防尘防水:IP 67 |
重复性:±2 mm |
分辨率（加仑）:5 mm |
冲击耐久:15 g (11 ms) |
存储温度范围:-25 ~ 80 ℃ |
额定工作电压:18 ~ 30 Vdc |
震动耐久:5 g (10 ~ 2000 Hz) |
重量 [g]:372 g |
Active Range:390 mm |
Analog Output Signal:4 ~ 20 mA; 0 ~ 10 V |
Certifications:DIN EN 61000-6-4; DIN EN 61000-6-2; DIN EN 60068-2-29; DIN EN 60068-2-6 |
Default DeviceID:650 |
Digital Communication Protocol:IO-Link (COM2, 38.4 kBaud, 1.1) |
Digital Output Configuration:1 channel (PNP/NPN, NO/NC configurable) |
Full Signal Current:20 mA |
Full Signal Voltage:10 V |
Hysteresis OP:3 mm |
Inactive Range I1:60 mm |
Inactive Range I2:22 mm |
Max Load:500 Ω |
Max Voltage Drop Switching Output DC:2.5 V |
Measuring Principle:Capacitive |
Medium Temperature:0 ~ 35 ℃ |
Min Load Resistance:2000 Ω |
Min Process Cycle Time:3.2 ms |
Parameter Setting Options:Hysteresis/window; NO/NC; Switching logic; Current/voltage output; SP/rP position; Adjustment OP; Medium selection; Offset setting; Switch-on/switch-off delay |
Permanent Current Rating Switching Output DC:200 mA |
Power-on Delay Time:<3 s |
Process Data Analog:2 |
Process Data Binary:1 |
Profiles:Generic Profiled Sensor |
Range:35 ~ 390 mm |
Reference Point OP:139; 163; 188; 212; 236; 261; 285; 310; 334; 358; 383; 407; OFF |
Required Master Port Class:A |
Reset Point rP:30 ~ 385 mm |
SDCI Standard:IEC 61131-9 |
SIO Mode:Supported |
Set Point SP:35 ~ 390 mm |
Wetted Parts Material:PP |
Zero Signal Current:4.0 mA |
Zero Signal Voltage:0 V |
查看更多
