SICK 西克 IN40-E0101K 非接触式安全互锁开关

产品概述

The IN4000 inductive safety switch is used for position monitoring and has an inductive sensor that is activated by metal (e.g. steel ST37), therefore it does not require a separate coded actuator. Due to the non-contact form of operation, this safety switch is straight forward to adjust and install and offers increased resistance to shock and vibration. The response range of the sensor is monitored spatially and over time, providing increased protection against tampering. Supply Voltage = 24 V dc, Safety Contacts = 2NO, Housing Material = Plastic, Connection Type = M12, Switch Type = Cuboid, Terminal Type = 4-Pin M12 Connector, Series = IN4000, Switching Distance = 15 mm, IP Rating = IP67, Width = 40mm.

核心特点/优势

• 采用非接触式感应技术，无需额外编码执行器，安装和调试简便
• 具备抗冲击和抗振动能力，适用于恶劣工业环境
• 感应范围在空间和时间上均受监控，有效防止人为干扰
• IP67防护等级，具备良好的防尘防水性能

选型指南/使用建议

推荐用于需要位置监控的工业自动化场景，适用于金属目标物（如ST37钢）的检测。供电电压为24V直流，建议在无腐蚀性气体、无强电磁干扰的环境中使用。安装时应确保传感器与目标物之间无遮挡，以保证感应距离的稳定性。